Frigidaire FFRH0822R1 Installation Instructions

READ BEFORE INSTALLING UNIT

For SLO3 Air Conditoner (8,000~12,000 BTU)

1

Installation Instructions

Tools and Parts:
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools
listed here.

Flat-blade and Phillips screwdrivers

Level

TOOLS NEEDED

Tape measure

'ULOODQGƎƎ，ƎRUVPDOOHUGULOOELW

Through-the-wall Installation:
In addition to the tools listed above, the following tools are needed for through-the-wall installation.

saw

caulk

TOOLS NEEDED

ƎFPRUWKLFNHUOXPEHU

;ƎZRRGVFUHZV

Parts Supplied:
Check that all parts are included in parts package:

Hardware

Qty.

3

;Ǝpan - head
Phillips screws

Qty.

1

1

;Ǝround - head
screws

;Ǝpan - head
Phillips screws

Top channel

Window sash seal

window lock bracket

Hardware

1

Foam seal

1

side curtains

2

2

         Safety Lock
(for Vinyl-Clad window)

weather seals

Ǝ;Ǝ;Ǝ

2020213A1640

Pay attention to danger and safety notices.

To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may 
be exposed:

Air conditioners covered in this manual pose an excessive weight hazard. Two or more people are needed to move and install 
the unit. Wear protective gloves whenever lifting or carrying the unit. AVOID the sharp metal fins of front and rear coils. To 
prevent injury or strain, use proper lifting and carrying techniques when moving unit.
Carefully inspect location where air conditioner will be installed. Be sure it will support the weight of the unit overan extended 
period of time.
Handle air conditioner with care. 
Make sure air conditioner does not fall during installation.

Carefully read the installation manual before beginning.
Follow each step as shown.
Observe all local, state, and national electrical codes and by qualified, licensed, authorized personnel only.

INSTALLATION WARNINGS AND CAUTION