Frigidaire FFRE1001PW Installation Instructions | Page 10

Frigidaire Dryer Installation Instructions - FFRE1001PW.
Download
Page  of 60
4.8, 1617 votes
background image

10

INSTALLATION REQUIREMENTS

NOTE

To achieve an installation with 0” (0 cm) clearance 

for the back of the dryer (for other than straight back 

venting), a quick-turn 90° dryer vent elbow must be 

installed as described previously in this manual.

*  Dryer must be vented straight back to achieve 

0” (0 cm) rear installation.

MINIMUM INSTALLATION CLEARANCES - Inches (cm)

SIDES

REAR

TOP

FRONT

 Alcove

0” (0 cm)

0” (0 cm)* 23” (58.5 cm)

n/a

 Closet

0” (0 cm)

0” (0 cm)* 23” (58.5 cm) 1” (2.5 cm)

1”

(2.5 cm)

0”

(0 cm)

23”

(58.5 cm)

Clearance requirements

IMPORTANT

DO NOT INSTALL YOUR DRYER:
  1  In an area exposed to dripping water or outside 

weather conditions.

  2  In an area where it will come in contact with 

curtains, drapes, or anything that will obstruct 

the fl ow of combustion and ventilation air.

  3  On carpet. Floor MUST be solid with a maximum 

slope of 1 inch (2.54 cm).

0”

(0 cm)

0”

(0 cm)

WARNING

EXPLOSION HAZARD

Do not install the dryer where gasoline or other 

fl ammables are kept or stored. If the dryer is installed 

in a garage, it must be a minimum of 18 inches (45.7 

cm) above the fl oor. Failure to do so can result in 

death, explosion, fi re or burns.

13.50”

(34.5 cm)

to center of rear vent

centerline height 

for rear vent

27” (68.5 cm)

29” (73.5 cm)

to front of closed door

50” (127 cm)

to clear open door

fl oor line

1.6”

(4 cm)

3.75”

(9.5 cm)

3.7”

(9.5 cm)

42.5”

(108 cm)

38.5”

(98 cm)

gas supply 

pipe on rear 

of gas unit

electrical

supply on

rear of unit1

Dryer Dimensions

1

Power supply cord length on gas unit approximately 60 inches (152.5 cm).

0.592229s