Frigidaire FFPA1422R1 Owner's Manual | Page 7

Frigidaire Portable Air Conditioners Owner's Manual - FFPA1422R1.
Download
Page  of 13
4.9, 1471 votes
background image

7

(continued)

2009 Electrolux Home Products, Inc.

All rights reserved.

Installation in a double-hung sash window

3. Close the window sash securely against the window slider kit. (Fig. 13)

7. Cut the foam seal to an appropriate length and seal the open gap

    between the top window sash and outer window sash, as shown in Fig.15.

2. Open the window sash and place the window slider kit on the window stool

   (Fig. 11). Attach the window slider kit to the window stool. Adjust the length

   of the window slider kit according to the width of window. Screw down the

   two screws on the window slider kit. See Fig.11. Cut the adjustable window

   slider kit if the width of window is less than 26.6 inches (Fig. 12). 

1. Cut the foam seals(adhesive type) to the proper lengths and attach them 

    to the window and stool. (Fig. 10)

Installation in a sliding sash window

3. Close the sliding sash securely against the window slider kit. (Fig. 18)

1. Cut the foam seals(adhesive type) to the proper lengths and attach them 

    to  the window frame. See Fig.16.

2. Open the window sash and place the window slider kit on  the window stool.

    See Fig.17. Attach the window slider kit to the window stool. Adjust the

    length of the window slider kit according to the height of window. Screw 

    down the two screws on the window slider kit. See Fig.17. Cut the adjustable 

    window slider kit if the height of window is less than 26.6 inches (Fig. 12).

6. Cut the foam seal to an appropriate length and seal the open gap 

    between the sliding sash and outer window sash, as shown in Fig.19.

Fig. 10

Foam seal A

(adhesive type) 

Fig. 16

Foam seal

(adhesive type)

Installation Instructions

Installation Instructions

Fig. 19

Foam seal

Fig. 11

Window slider kit

Window stool

26.6"~48.5"

screws

Fig. 20

Fig. 12

Cut this side to fit your window

4. Drive two 1/2" screws to secure the window slider kit to the window sash.
    (FIG. 13)

6. To secure lower sash in place, attach right angle sash lock with 
   1/2″ (12.7mm) screw as shown (FIG. 14). 

NOTE: It is difficult to lock the windows with the sash lock for Vinyl-Clad 
windows, so you can use lock by window itself. 

7. To secure the sliding sash in place, attach right angle sash lock with 1/2"

   (12.7mm) screw as shown.(Fig.20)

5. Secure the window slider kit to the window stool (FIG. 13): 

   A: For wooden windows: Use 3/4" screws for securing.

   B: For Vinyl-Clad windows: Use 1/2″ hex head cap screws for securing.

4. Drive two 1/2" screws to secure the window slider kit to the window sash.

   (Fig. 18)

5. Drive two 3/4" screws to secure the window slider kit to the window stool.

    (Fig. 18)

Fig. 14

Fig. 15

Foam seal

m

3/4″ screws or 1/2″ 

hex head cap screws

1/2″ screws

Fig. 13

Window slider kit

Window stool

screws

Fig. 17

26.6"~48.5"

Window stool

Window slider kit

3/4″ screws

1/2″ screws

Fig. 18

Window stool

Window slider kit

0.628342s