Friedrich WALLMASTER SUBBASE WE User's Manual

Friedrich Air Conditioners User's Manual - WALLMASTER SUBBASE WE.
Download
Page  of 2
4.3, 2406 votes
background image

INSTALLATION INSTRUCTIONS

SUBBASE FOR WS, WE & WY MODELS

These instructions are provided for installation of the WallMaster Subbase. This accessory subbase can be used 
whenever a WallMaster air conditioner is installed in a wall from 2" to 12" thick, or when additional support or leveling 
of the unit is desired.

NOTE:  The subbase should be assembled to the WSC sleeve before sleeve is installed in the wall, however it may 
be used with existing installations.

ELECTRICAL DATA

STEP 1. 

A fi eld supplied receptacle to match chassis plug may be installed for power cord connections. Also, a 
location for an optional fi eld-supplied disconnect switch is available.

STEP 2. 

Refer to chassis nameplate for proper circuit requirements.

STEP 3. 

All wiring must comply with local and national electrical codes.

INSTALLATION INSTRUCTIONS

STEP 1. 

Attach left and right side template to WSC sleeve as indicated.  Drill two 9/64" diameter  

 

 

holes in both sides. Remove templates.

STEP 2. 

Attach mounting brackets to sides of subbase and fi ller plate with four 3/8" phillips screws as   

 

shown in Figure 1. Do not tighten.

FIGURE 1

617-407-00 (10-04)

Related Manuals for Friedrich WALLMASTER SUBBASE WE

0.559497s