Fisher & Paykel DD36STI2 User's Manual

Fisher & Paykel Dishwasher User's Manual - DD36STI2.
Download
Page  of 2
4.7, 1580 votes
background image

1H

Your model

Your remote control

Selecting a wash program

Loading and detergent

Signal indicator

 

single flash 
indicates a 
successful 
signal to the 
dishwasher.

 

Multiple flashes 
indicate that 
the dishwasher 
cannot read 
the signal. The 
remote control 
may be out of 
range. 

Mounting your 

remote

Your remote control
comes supplied with a 
detachable mounting
bracket and self
adhesive strip. You can
choose to affix this
bracket on a nearby
surface, which should be
out of direct sunlight
and away from excessive
heat and steam. Do not
apply on wallpaper.

Slide off remote, then 
press bracket firmly to 
surface for 30 seconds. 
Wait 1 hour before 
refitting remote. 

Press remote & bracket 

to clean, dry surface 
for 10 seconds

10 seconds

30 seconds

Peel red liner off, 
press adhesive to bracket

Doubles remote shown

Peel black 
liner off

‘Battery low’ indicator

When this 
flashes, the 
battery needs to 
be replaced. Use 
a CR2032 battery, 
ensuring the 
+ symbol faces up.

Double models only

(operates lower drawer)

Control button(s)

See section ‘Operating instructions’ 
for information.

Important!
To prevent unauthorized use, keep the remote control out of reach of children. 

Discard scraps

Scrape large food particles off
(e.g. bones, fruit stones) and
remove any foreign objects 
(e.g. toothpicks, strings, paper). 

Add detergent and check rinse 
aid

Fill the detergent dispenser (a) with
powdered detergent and close the
dispenser door.

Important!
Do not place liquid detergent or tablets in
the detergent dispenser.

If the indicator on its plug (c) glows
bright red, refill the rinse aid
dispenser (b) with liquid rinse aid. 
Make sure you then refit the rinse
aid plug back into its original
position.

If using a tablet, place it in the
cutlery basket (d) or at the bottom
of the drawer.

1

4

4

2

1

3

2

3

Load dishes carefully

To help with wash performance,
arrange dishes so they are
evenly spaced and not nesting.

Check spray arm(s)

Ensure there are no items
blocking the spray arm(s) from
rotating.

DD60DI7

DD24D(H)(T)I7

DD60S(T)I7

DD24S(H)(T)I7

DD90STI2 

DD36STI2

Operating instructions

a

b

d

c

You can operate your dishwasher in two ways:

EITHER
by using the 

 button 

on the drawer control panel

OR
by using the 

 remote 

control button 

Note: each drawer in
double models has its own
controls and can run
independently of the 
other drawer.

Start/resume wash

1

      

Press 

.

2

   

Close the drawer. The wash will start.

Pause wash

You can only pause the wash with the 
remote. See opposite.

Cancel wash

1

      

Pause the wash with the remote.

2

   

Open the drawer, then press and 

       hold 

 until you hear a

       quick double beep.
Any water in the drawer will automatically 
drain when you close it. 

Set Delay start

To delay the start of a wash by 1 to 12
hours:

  Press and hold 

. Count the beeps 

as the dishwasher emits them (each 
represents 1 more hour of delay) and 
release the button when you have 
reached the desired delay time.

  The indicator of the selected wash 

program will flash to show that Delay 
start has been set.

  The wash will start once the delay 

time is over, provided the drawer is 
closed.

Cancel Delay start

Press and hold 

 until you hear a quick 

double beep and the indicator of the 
selected wash program goes out.

Start/resume wash

1

       

Close the drawer.                                

2

 

 

Press 

 . The wash will start.

Pause wash

Press 

 .    

After pausing a wash, wait for 3 beeps 
before opening the drawer. Forcing it open 
in mid-cycle may cause damage or injury.

Cancel wash

Press and hold 

 until you hear a quick 

double beep.
Any water in the drawer will automatically 
drain.

Set Delay start

You can only set Delay start on the drawer 
control panel. See opposite.

Cancel Delay start

Press and hold 

 until you hear a quick 

double beep.

 

Keep this document handy for easy reference.

 

For detailed information on the features of your dishwasher, see your ‘User guide’.

 

Before using your dishwasher, make sure you read the full ‘User guide’, with special attention to the ‘Safety and warnings’ section.

 

For contact information or if you require service, assistance or replacement parts, see the end of this document or your ‘Service & warranty’ booklet.

NZ AU US CA

QUICK START GUIDE

DishDrawerTM   dishwasher (Integrated)

ECO indicator

The indicator will 
glow red when an 
Eco program has 
been selected.
If you require
enhanced 
drying, we do 
not recommend 
selecting an Eco 
program.

Wash 
program 
selector

Press to
scroll
through the
wash
programs.

STANDARD PROGRAMS - designed to clean and dry your dishes

ECO PROGRAMS - designed to clean your dishes energy-efficiently

HEAVY

Heavily soiled
pots, pans and
dishes.

HEAVY ECO

Heavily soiled
everyday
dishes.

FAST

Lightly soiled
dishes.

FAST ECO

Lightly soiled,
non-greasy
dishes.

RINSE

Prevents
odors
and soils
drying on
dishes.

DELICATE

Lightly soiled
and heat
sensitive
crockery.

DELICATE
ECO

Lightly soiled,
non-greasy
and heat
sensitive
crockery.

NORMAL

Dishes with
normal
soils for
optimum 
performance.

NORMAL 
ECO

Normal soiled
dishes for
optimum
water and
energy use.

Wash program indicators
These show which program is selected.

continued over

0.636037s