Extron electronic Multi-Graphic Processor MGP 464 User's Manual | Page 8

Extron electronic DJ Equipment User's Manual - Multi-Graphic Processor MGP 464.
Download
Page  of 140
4.5, 2384 votes
background image

MGP 464 • Quick Start

QS-4

PRELIMINAR

Y

Quick Start — MGP 464, cont’d

d

.  Rotate the Adjust knobs until the H and 

V values represent the image dimensions 

or position coordinates you want for the  

selected input.

e

.  Repeat steps c and d as needed to refine the 

size and position adjustments for the selected 

input.

f

.  Repeat steps a through e for the remaining 

windows for the same input.

g

.  Repeat steps a through f for each remaining 

input.

Auto Image
As an alternative to step 8 for any window, Auto 

Image provides a quick way to size an input to fit 

the current window size.  
To auto-size an image, 
a

.  Press the button for the input that you want 

to auto-size.

b

.  Press the Menu button to select the Auto 

Image menu.

c

.  Press the Next button to display the Auto  

Image selection screen.

d

.  Turn either Adjust knob to select a window 

for Auto Imaging.

e

.  Press the Next button again to perform an 

Auto Image in the selected window.

Step 9

Use the Input Configuration menu to make 

any desired advanced adjustments, including 

Horizontal and Vertical Start, Pixel Phase, Total 

Pixels, Active Pixels, and Active Lines.  See 

chapter 3, “Operation,” for information on these 

adjustments.

Step 10

When finished adjusting the desired picture 

controls, save your configuration as a window 

preset:
a

.  Press the Preset Recall/Save button and hold 

it for at least 2 seconds.

b

.  Use either Adjust knob to select the preset 

number/name to which you want to save 

this configuration.

c

.  Press the Enter button.

Step 11

Size and position windows as desired for each 

of your applications and save each one with any 

one of the remaining 127 window preset names 

for easy recall of window settings.
You can also save presets using the MGP 464 Web 

pages (see chapter 5, “Ethernet Configuration 

and Control”) or the MGP 464 Windows-based 

control software (see “Using the Windows-

based Control Software” in chapter 4, “Software 

Configuration and Control,” for instructions on 

accessing the software and its Help file). 

0.585706s