Extron electronic Extron Electronics Network Cables BNC 5 RC User's Manual

Extron electronic Network Cables User's Manual - Extron Electronics Network Cables BNC 5 RC.
Download
Page  of 1
4.8, 2171 votes
background image

Extron Electronics, USA
1230 South Lewis Street
Anaheim, CA 92805
USA
714.491.1500  
Fax 714.491.1517

Extron Electronics, Europe
Beeldschermweg 6C
3821 AH Amersfoort
The Netherlands
+31.33.453.4040  
Fax +31.33.453.4050

Extron Electronics, Asia
135 Joo Seng Road, #04-01
PM Industrial Building
Singapore 368363
+65.6383.4400  
Fax +65.6383.4664

Extron Electronics, Japan
Daisan DMJ Building 6F
3-9-1 Kudan Minami
Chiyoda-ku, Tokyo 102-0074 Japan 
+81.3.3511.7655  
Fax +81.3.3511.7656

www.extron.com

68-482-01

Rev. D

BNC 5 RC Termination Instructions

1

. Slide the color coded heat shrink tubing or BNC

strain relief over the cable, then slide the ferrule over
the cable.  See the top diagram.

2

. Carefully strip the end of the coaxial cable to expose

the shielding and inner conductor.

3

. Insert the center conductor into the center

pin.

4

. Insert the conductor and pin into

the crimp tool (part #100-133-01)
with the included die.  With the
flange on the center pin flush with
the edge of the die,  crimp using
the die’s .068” crimp height.

Shielding

Outer insulation

Conductor

Ferrule

Color-coded

heat shrink tube

Center

pin

Support sleeve

BNC plug body

Shielding

NOT TO  SCALE

Outer Insulation

.094"

(2.4 mm)

Conductor

.375"

(9.5 mm)

.496"

(11.9 mm)

.250"

(6.4 mm)

2

Center pin

3

Crimp Center Contact

Center Contact - flange flush 
with edge of die

4

Related tools and parts list:

Crimp tool ............................................ 100-133-01

BNC 5 RC cable (500’ spool) ................ 22-127-02

Male BNC RC connectors (qty. 50) ...... 10-452-01

5

. Insert the center pin into the BNC

body until the pin meets resistance.
Continue firmly pushing the pin into
the BNC body until the pin snaps
into the detent position.

6

. Slide the exposed shielding over the support

sleeve of the BNC.

7

. Slide the ferrule over the

shielding and against the BNC
body.  Using the die’s .213” crimp
height, crimp the ferrule.

8

. Slide and set the heat shrink

tubing or BNC strain relief over
the ferrule.

5

BNC plug body

5

Crimp ferrule

7

Heat shrink tubing

Install strain relief

Recommended
glue

or

8

Related Manuals for Extron electronic Extron Electronics Network Cables BNC 5 RC

0.554533s