Extron electronic Extron Electronics Computer Hardware AAP TX/RX User's Manual

Extron electronic Computer Hardware User's Manual - Extron Electronics Computer Hardware AAP TX/RX.
Download
Page  of 2
4.2, 2419 votes
background image

1

USB Extenders • Setup Guide

This guide provides basic instructions for an experienced technician to install and operate 
the Extron USB Extenders. 

USB

USB

HUB

1

2

3

4

POWER

12V

1.0A MAX.

LINK

DO NOT

CONNECT

TO LAN

HOST

POWER

12V

0.4A MAX.

DO NOT

CONNECT

TO LAN

LINK

Ground  

+12 VDC 

External 

Power Supply

(12 VDC, 1 A )

Ground  

+12 VDC 

External 

Power Supply

(12 VDC, 1 A )

Keyboard

Laptop

Four USB 2.0 compatible type A female 
connectors provide +5 VDC at up to 
500 mA to connected USB peripherals.

If the USB host is capable of supplying power, 
a transmitter power supply is not required.

The receiver must have a power supply connected.

Transmitter

Receiver

UTP or STP CAT5 or better cable:
Terminate both ends identically, in accordance with 
either the TIA/EIA T 568A or the TIA/EIA T 568B 
wiring standard.

Run All Cables

Connect the transmitter and receiver as shown above. 

NOTE:  The host and hub connectors of the AAP and Decora models are on the front panel. The host 

connection on the AAP and Decora transmitter is a female mini USB Type B. Connection and operation 
are the same as the rack mount Tx/Rx models.

The USB Extender Series includes the USB Extender Tx/Rx, AAP Tx/Rx, and Decora® Tx/Rx. They are USB transmitter and 
receiver pairs that extend the usable distance of USB 1.0, 1.1, and 2.0 standards with data transfer rates up to 480 Mbp and 
data transmission up to 450 ft (135 m) with standard Category 5/5e/6/6e/7 cable. 
The rack mountable Tx/Rx, AAP mountable Tx/Rx, and Decora Tx/Rx models can be mixed.

Mount the USB Extenders

The USB Extender series includes transmitters and receivers in three form factors to provide a variety of mounting options 
including: 

 

z

USB Extender Tx/Rx in quarter rack width, 3 inch deep, 1 inch high metal enclosures

 

z

USB Extender AAP Tx/Rx for double-space Architectural Adapter Plate openings

 

z

USB Extender D (Decora) Tx/Rx for one-gang wall box or mud ring mounting 

Choose the appropriate mounting location and install the USB Extender transmitter and receiver following instructions 
supplied with the mounting kit. If the rear panel connectors will be covered after mounting, make all connections prior to 
permanently mounting a USB Extender.

Related Manuals for Extron electronic Extron Electronics Computer Hardware AAP TX/RX

0.563680s