Epson Stylus 411638300 User's Manual

Epson All in One Printer User's Manual - Stylus 411638300.
Download
Page  of 8
4.2, 1377 votes
background image

                               

*411638300*

*411638300*

If anything is missing, contact Epson as described on the back.

Note: The model name of your product may vary slightly from the one shown above. 
The included CD and documentation apply to all products in the series.

Caution: Do not open ink cartridge packages until you are ready to install the ink. 
Cartridges are vacuum packed to maintain reliability.

Canada only: For French speakers, remove sticker(s) from the backing sheet and 
place over corresponding text on the control panel. 

Remove all protective materials.

Unpack

1

Start Here

 

Select language

3

   Press or to select your language, then press OK.

3  Squeeze the edge guide and slide it left.

Tip:If the feeder guard is in the way, flip it forward.

4  Load paper against the right edge and behind the tab, with the printable 

side face up.

 

Note:Don’t load the paper sideways; always load it short edge first.

5  Slide the edge guide over.

Continue with section 6 to choose your connection type and install software.

5   Press each cartridge down until it clicks.

6  Close the ink cartridge cover. Press it down until it clicks.

7  Lower the scanner.

8  Press the OK button to charge the ink. Charging takes about 3 minutes.

Note: Your NX510 Series ships with full cartridges and part of the ink from the 
first cartridges is used for priming the NX510 Series.

Caution: Don’t turn off the NX510 Series while the ink system is charging or 
you’ll waste ink.

(Included for  

Canada only)

1  Connect the power cable.

 

Caution: Do not connect to your computer yet.

2  Raise the display screen, then press the On button.

Turn on and adjust

2

Power cord

Series

Install ink cartridges

4

Note: Do not load paper yet.

1   Lift up the scanner, then open the cartridge cover.

2   Shake the ink cartridges gently 4 or 5 times, then unpack them.

3  Remove only the yellow tape from each cartridge.

 

Caution: Don’t remove any other seals or the cartridges may leak.

4   Insert the cartridges in the holder for each color.

1  Open the paper support and pull up the extensions.

2  Open the output tray, pull out the extensions, and raise the stopper.

 

Note: If you are using legal-size paper, do not raise the stopper.

5 Load paper

Related Manuals for Epson Stylus 411638300

0.518215s