Emerson EWV403 Owner's Manual

Emerson VCR Owner's Manual - EWV403.
Download
Page  of 8
4.4, 1777 votes
background image

If channel 3 is already occupied for broadcasting,
1) Set your TV to channel 4.
2) Insert a pre-recorded tape into the VCR.
3) Press the PLAY button once.
4) After a few seconds, press the PLAY button on the VCR for 3 seconds.

• The RF output channel will change to channel 4 from channel 3 and you will

see a playback picture.

• When a picture does not appear on the TV screen, repeat step [4].

5) Press the STOP button to stop playback.

You can use the AUDIO OUT jack and
VIDEO OUT jack on the back of the
VCR if your TV has Audio/Video Input
jacks. In this case, you need to set the
TV to external Line Input Mode. Please
refer to your TV’s owner’s manual.

- 1 -

Owner’s Manual
Video Cassette Recorder
EWV403

If you need additional operating assistance after
reading this owner’s manual or to order replace-

ment accessories, please call  

TOLL FREE : 1-800-256-2487

or visit our web site at http://www.funai-corp.com

0VMN03903 / HF330UD 

★★★★★

Printed in China

ANT

AUDIO

VIDEO

IN

OUT

OUT

IN

ANT

AUDIO

VIDEO

IN

OUT

OUT

IN

AUDIO IN jack
Connect the audio cable from the audio out
jack of a camcorder, another VCR, or an
audio source.

VIDEO IN jack
Connect the video cable from the video out
jack of a camcorder, another VCR, or an
audio-visual source (laser disc player,
video disc player, etc.).

AUDIO OUT jack
Connect the audio cable to the audio in jack
of a camcorder, another VCR, a stereo
amplifier, or an audio system.

ANT IN jack
Connect your antenna or cable box.

ANT OUT jack
Connect the RF cable (supplied) to
the antenna input jack on your TV.

Front & Rear Terminals

Stereo TV  Connection

ANT

IN

OUT

AUDIO

ANT

IN

OUT

VIDEO

Connect

1

Audio/Video Cables

(not supplied)

L

R

AUDIO OUT

VIDEO

OUT

L

R

AUDIO IN

VIDEO

IN

(Back of TV)

IN

OUT

(Back of VCR)

• Remote control

(NA372UD) with
Two AA batteries

• RF Cable

(WPZ0901TM002)

• Owner’s Manual

(0VMN03903)

Supplied Accessory

Installing the Batteries for
the Remote Control

Install two AA batteries
(supplied) matching the
polarity indicated on
the bottom of the
remote control.

Hint

• The RF output channel may

not change when you adjust
tracking during playback. In
this case, stop the playback,
and start the playback again.
After that, press the PLAY but-
ton on the VCR for 3 seconds
again.

VIDEO OUT jack
Connect the video cable to the video in jack
of a camcorder, another VCR, or a TV.

RF Output Channel

EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS
OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A.

CHANNEL

POWER

TAPE IN

TIMER

REC

MENU

VCR/TV

POWER

VIDEO

AUDIO

1. Before using your VCR

ANT

IN

OUT

RF Cable (supplied)

(Back of VCR)

(Back of TV)

(Back of TV)

Plug the AC power cords of the VCR and TV into the AC outlets.

4

Disconnect

Antenna

or

2

Connect

3

Connect

Cable

Signal

Antenna

or

Cable

Signal

Basic VCR/TV  Connection

Select this connection when you want to view or record a
scrambled channel. With this connection, channels cannot
be changed on the VCR. You can view or record ONLY the
channels you have selected on the cable box or the satellite
box.
• While you are recording, only the recorded channel can

be viewed.

To select channels of the cable box or satellite box
1)Turn on the VCR by pressing the POWER button, and

then, press the VCR/TV button.The POWER and the
VCR/TV indicators on the front panel will light on. Then,
press the CHANNEL buttons to select channel 3 or 4
(the same channel as the output channel of the cable
box or satellite box).

• If you use the channel 4, you need to change the VCR’s

RF output to channel 4. Refer to “RF Output Channel”.

2) At the TV, select channel 3 or 4 (the same channel as

you have selected at step 1).

3) At the cable box or satellite box, select the channel you

want to view or record.

Select this connection when you want to change channels
on the VCR. With this connection, you may watch one
channel while recording another.
• You may not view or record a scrambled channel.

To select channels of the cable box or satellite box
1)At the cable box or satellite box, select channel 3 or 4

(the same channel as the VCR’s RF output channel.)

• Refer to “RF Output Channel”.

2)At the TV, select the same channel as the output chan-

nel (3 or 4) of the cable box or satellite box.

3)Turn on the VCR by pressing the POWER button, and

then, press the VCR/TV button .The POWER and
VCR/TV indicators on the front panel will light on. Then,
select the channel you want to view or record.

To play back a tape
Follow the steps 1) to 2) above. Then, play back a tape.
• Refer to “Playback” on page 5.
To view one channel while recording another
1)While you are recording on the VCR, press the VCR/TV but-

ton so that the VCR/TV indicator disappears on the VCR.

2)At the cable box or satellite box, select the channel you

want to view.

Hint for Cable Box or Satellite Box

ANT

IN

OUT

RF Cable

(supplied)

(Back of VCR)

IN

OUT

E

(Back of TV)

Cable 
Signal

Connection A

(Cable  box or 

Satellite box)

ANT

IN

OUT

RF Cable (supplied)

RF Cable

(Back of TV)

IN

OUT

(Cable  box or

Satellite box)

E

Cable 
Signal

Connection B

(Back of VCR)

0.558605s