Edelbrock 71900 User's Manual

Edelbrock Automobile Parts User's Manual - 71900.
Download
Page  of 17
4.2, 2337 votes
background image

www.edelbrock.com

Page 1 of 17

Please study these instructions carefully before installing your new Progressive Nitrous Contoller. If you have any questions,
please contact our Technical Hotline at : 1-800-416-8628 from 7 am - 5pm, Monday-Friday, Pacific Standard Time or e-mail
us at Edelbrock@Edelbrock.com.

Important Information - You must use Static Suppression Ignition Wires with this controller. The
71900 Progressive Nitrous Controller contains high frequency digital electronics and will NOT function correctly
without suppression wires.

Warning - Do not mount the progressive controller anywhere near ignition components or any other
source of electronic noise.

Notice - The controller must be grounded directly to the vehicle’s battery.

Caution - Do not submerge the controller in liquid or directly wash the unit with liquid of any type!

Warning - The programming switches are delicate electronic items and can be damaged by misuse
and/or carelessness.  If the controller is close to your nitrous bottle, be careful when installing the bottle.
The weight of the bottle is enough to easily damage the switches.  Switches that have been determined
to be damaged due to neglect will NOT be covered under warranty.

Notice:

It is the responsibility of the purchaser to follow all guidelines and safety procedures supplied with this product and any

other manufactures product used with this product. If is also the responsibility of the purchaser to determine compatibility of
this device with the vehicle and other components.

Edelbrock Corporation assumes no responsibility for damages resulting from accident, improper installation, misuse,

abuse, improper operation, lack of reasonable care, or all previously stated reasons due to incompatibility with other
manufacturer’s products.

Edelbrock Corporation assumes no responsibility or liability for damages incurred fron the use of products manufactured

or sold by Edelbrock Corporation on vehicles used for competition racing.

Edelbrock Corporation neither recommends nor approves the use of products manufactured or sold by Edelbrock

Corporation on vehicles which may be driven on public highways or roads, and assumes no responsibility for damages incurred
from such use.

It is the purchaser’s responsibility to check the state and local laws pertaining to the use of Nitrous Oxide for racing

applications. Edelbrock Corporation does not recommend nor condone the use of its products for illegal street racing.

Installation of this Edelbrock product signifies that you have read this document and agree to the terms
stated within.

Caution:

Follow all recommended safety guidelines from this and other manufacturer’s installation guides. Never install any

device which pulsates nitrous solenoids without a safety solenoid installed. Static Suppression ignition wires must be used with
this unit!  Mount the unit as far away from secondary ignition components (coil, ignition wires, etc.) as physically possible.

©2008 Edelbrock Corporation
Catalog #71900

Brochure #63-0473

Rev. 08/08 - AJ/mc

Catalog #71900

Progressive Nitrous Controller

0.556551s