Digi Tech RP90 Owner's Manual | Page 9

Digi Tech Musical Instruments Owner's Manual - RP90.
Download
Page  of 48
4.7, 2413 votes
background image

  

3

indicate whether you are sharp or flat.  The left 6 red LEDs indicate the note is flat and should be 

tuned up.  The right 6 red LEDs indicate the note is sharp and should be tuned down.  The center 

LED indicates the note is in tune.  The output is muted in Tuner mode; rock the Expression Pedal 

to regain volume.

Display shows

note played

Right LEDs indicate

note is sharp

Center LED indicates

note is in tune

Left LEDs indicate

note is flat

In Tuner mode, you can change your tuning reference with the Vallue Up/Down buttons.  The 

default factory setting is A=440 Hz (displayed as 40).  Other tuning references are A=A flat (dis-

played as Ab), A=G (displayed as G), and A=G flat (displayed as gb).  The display window will briefly 

flash the currently selected tuning preference.

Exit Tuner mode by pressing either Footswitch.

0.464317s