Digi Tech RP90 Owner's Manual | Page 8

Digi Tech Musical Instruments Owner's Manual - RP90.
Download
Page  of 48
4.7, 2413 votes
background image

2

About the RP90

Performance Mode

When you first apply power to the RP90, it powers up in Performance mode. Performance mode 

provides access to all of the presets within the RP90 via the Up and Down Footswitches.   The 

Edit Up/Down buttons cycle through the effects in the matrix.

Edit Mode

When you select an Effect with the Edit Up/Down buttons, you can adjust the Effect with the 

Value Up/Down buttons. (For descriptions of the Effects and their parameters, see page 20.) 

When you make changes to a preset’s Effects, you must store the changes or they will be lost 

when you select a different preset or disconnect power to the RP90. See page 18 for a description 

of the Store procedure.

Bypass Mode 

The RP90 presets can be bypassed for a clean, unprocessed guitar signal.  To bypass the RP90, press 

and release both Footswitches simultaneously.  The Display reads By indicating the preset is 

bypassed.  In Bypass mode, all buttons are disabled. Press either Footswitch to exit Bypass mode 

and return the RP90 to the last preset used. 

Tuner Mode 

The Tuner in the RP90 allows you to quickly tune or check the tuning on your guitar. Enter Tuner 

mode by pressing and holding both Footswitches simultaneously.  The Display briefly shows tu 

indicating that you are in Tuner mode.  To begin tuning, play a note on your guitar (a harmonic 

at the 12th fret usually works best).  The Display shows the note being played. The Matrix LEDs 

0.543514s