Denon DN-X600 User's Manual | Page 9

Denon DJ Equipment User's Manual - DN-X600.
Download
Page  of 28
4.7, 1970 votes
background image

2

Before use 

Part names and 

Functions 

Connections 

Basic 

operations 

Effector 

function 

Fader

Start function 

USB settings 

Troubleshooting 

IndeX

specifications 

System diagram 

Main features

1. Wide range of input and output terminals 

The input and output terminals available on this unit are described 
below. 
Input 
• CD 2 
• PHONO 2 
• Mic 1 
• AUX1 1 
• AUX2 1 /Effect 1 (combined use) 
Output 
• Master 2  
• Booth 1 /Effect 1  (combined use) 
Input/Output 
• USB Audio Interface 
Additionally, this unit is a 96kHz/32 bit DAC supported DJ full digital 
mixer equipped with USB MIDI and terminal output MIDI interface. 

2. Designed to achieve high sound quality

• The unit features a 96 kHz/32-bit floating digital signal processor 

(DSP) and 32-bit digital-to-analog converter (DAC) (master output). 
The unit delivers high quality sound that is faithful to the original 
sound source.

• An  electrolytic  capacitor  designed  to  enhance  sound  quality  is 

employed in the power supply unit. Additionally, film capacitors that 
are  designed  to  enhance  sound  quality  and  high-precision  metal 
film  resistors  are  used  to  configure  the  audio  signal  processing 
unit, resulting in superb quality sound.

• The unit is equipped with a microphone amplifier that features a 

discrete transistor configuration and low equivalent input noise of 
126 dB, and a PHONO amplifier that features a signal to noise ratio 
of 89 dB. 

3. Multiple Effects

Specific parameters for each of the 8 different effects can be linked 
to the beats per minute (BPM) of every track passing through the 
mixer. The effects processor offers its own set of controls such as, 
Dry/Wet mix, Parameter Low/High pass filter, Cross Over filter, Beat 
time adjustments, TAP, Manual and Auto BPM, Pre Efx Cueing and 
ON/OFF.

4. USB audio and MIDI interfaces

• 8-channel  (4  stereo  channels)  96  kHz  USB  audio  input/output 

function

• DVS (Digital Vinyl System) compatible.
• Most of the panel operations can output MIDI.
• The MIDI clock signal is detected from the computer, and can be 

automatically used as a BPM value. 

• The  unit  incorporates  an  effect  send/return  function  that  allows 

effects to be applied to audio output from this unit using effector 
software  on  a  computer,  and  then  to  re-input  the  audio  into  the 
unit. 

• A low latency ASIO driver is also included with the unit. 

5. High-reliability design for professional use

• Isolator filters are incorporated for each input channel.
• Crossfader slide torque can be adjusted to personal preferences.
• Matrix  source  selectors  enable  the  selection  of  any  of  6  input 

sources

6. Others

• Ducking function reduces the amount of background sound during 

mic usage. 

• Channel Fader and Crossfader start function
• Auto Standby function (Eco mode) 

Cautions on handling

• Before turning the power switch on

Check once again that all connections are correct and that there are 
no problems with the connection cables.

• Power  is  supplied  to  some  of  the  circuitry  even  when  the  unit  is 

set to the standby mode. When going on vacation or leaving home 
for long periods of time, be sure to unplug the power cord from the 
power outlet.

• About Condensation

If there is a major difference in temperature between the inside of 
the  unit  and  the  surroundings,  condensation  (dew)  may  form  on 
the operating parts inside the unit, causing the unit not to operate 
properly.
If this happens, let the unit sit for an hour or two with the power 
turned  off  and  wait  until  there  is  little  difference  in  temperature 
before using the unit.

• Cautions on using mobile phones

Using  a  mobile  phone  near  this  unit  may  result  in  noise.  If  that 
occurs, move the mobile phone away from this unit when it is in use.

• Moving the unit

Turn  off  the  power  and  unplug  the  power  cord  from  the  power 
outlet. Next, disconnect the connection cables to other system units 
before moving the unit. 

• About Care

• Wipe the cabinet and control panel clean with a soft cloth.
• Follow the instructions when using a chemical cleaner.
• Benzene,  paint  thinner  or  other  organic  solvents  as  well  as 

insecticide may cause material changes and discoloration if brought
into contact with the unit, and should therefore not be used.

0.558306s