Denon DN-X1500S User's Manual | Page 5

Denon DJ Equipment User's Manual - DN-X1500S.
Download
Page  of 78
4.5, 1605 votes
background image

5

ENGLISH

1

MAIN FEATURES

1.

Matrix input assignment
8 input sources is freely assignable to each
channels.

2.

FLEX FADER
The DN-X1500S is equipped with a FLEX FADER
with built-in torque adjustment mechanism that
lets users adjust the operating force of the cross-
fader to their tastes.

3.

Sampler
On-board digital Sampler can record up to 8
seconds CD quality sound. You can seamlessly
Loop this Sampler or play it backwards
(REVERSE). The pitch and output level of Sampler
can be adjusted independently.

4.

Internal Effector
Various sound effects can be performed. (DELAY,
ECHO, PAN, TRANS, FILTER, FLANGER, KEY)

5.

Auto BPM counter, BPM Lock, TAP and Manual
BPM input
In addition to an Auto BPM counter and Tap
function, the DN-X1500S is also equipped with the
temporarily Lock function of the Auto BPM
counter and the Manual BPM input function.

6.

Channel Fader and Crossfader Start
The CD player can be started or stopped simply by
increasing or decreasing the level of the Ch. Fader
or by using the Crossfader left to right or right to
left. (This function can only be used when the
DENON CD players DN-S3500, DN-S5000, DN-
D4500 or etc. is connected to the DN-X1500S.)

7.

Digital output
The DN-X1500S allows you to record directly to
CD-R, MiniDisc or a hard disk device through it’s
exclusive coaxial digital output.
The digital output maintains a constant 44.1 kHz
signal.

8.

Enhanced SEND/RETURN terminals
8 LINE, 3 PHONO, 2 Microphone systems, 2
MASTER outputs, BOOTH output and REC output
are provided independently. Effect SEND/RETURN
terminals are also provided for a external effects
processor.

9.

3-Band equalizer/gain
LOW, MID, HI and GAIN controls are available on
every input channel.

10. Crossfader Contour

This feature allows adjusting the “shape” of the
Crossfader response from a gentle curve for
smooth, long running fades, to the steep pitch
required for top performance cut and scratch
effects.

11. Mic Post

This feature will pass the Mic signal into the
BOOTH, REC output and DIGITAL output signal
path.
In the OFF mode, the Mic signal will not be routed
through the above outputs.

2

INSTALLATION

When the DN-X1500S is installed inside a coffin or DJ
booth, separate it from the foam (sponge), walls or
other equipment to improve heat radiation.

3

PART NAMES AND FUNCTIONS (Refer to page 3.)

(1) Top panel

Power operation switch (POWER)

• The power turns on when the button is

switched from the off position (£) to the on
position (¢).

• The power turns off when the button is

switched from the on position (¢) to the off
position (£).

MASTER BALANCE control

• Adjusts the L/R balance of the MASTER output.

MASTER LEVEL control

• Adjusts the level of the MASTER outputs.

BOOTH ASSIGN switch

• Selects the source of the BOOTH output.

BOOTH LEVEL control

• Adjusts the level of the BOOTH output.

SAMPLER ASSIGN switch

• Use this to select the source for Sampler

recording.

SAMPLER MODE/STOP knob

• Use this to set the Sampler playback mode or

edit the Sampler.

• Push this knob during the Sampler playback or

recording, the Sampler playback or recording is
stopped.

SAMPLER A button

• Push this button, the Sampler recording or

playback starts.

SAMPLER B button

• Use this to set the Sampler B point.

Min. 2 cm

– TABLE OF CONTENTS –

z MAIN FEATURES ...............................................5
x INSTALLATION ...................................................5
c PART NAMES AND FUNCTIONS ................5 ~ 7
v CONNECTIONS ..................................................8
b SPECIFICATIONS................................................9

n FADER START ..................................................10
m EFFECTOR........................................................11
, SAMPLER.........................................................12
. PFL (Pre Fader Level) .......................................12
⁄0 PRESET ............................................................13

2

ACCESSORIES

Please check to make sure the following items
are included with the main unit in the carton:

q Operating instructions.......................................1

2

INTRODUCTION

Thank you very much for purchasing the DENON DN-X1500S DJ MIXER.
DENON proudly presents this advanced DJ MIXER to audiophiles and music lovers as a further proof of DENON’s
non-compromising pursuit of the ultimate in sound quality. The high quality performance and easy operation are
certain to provide you with many hours of outstanding listening pleasure.

Min. 2 cm

12. PFL (Pre Fader Level)

This feature provides a means to adjust the input
level gain of each channel to avoid over loading. By
making this adjustment in advance will insure a
smooth transition between cross fades or channel
fades.

13. Preset functions

It is possible to customise the machine to your
preference by saving your favourite setting to
internal memory. For items found in the presets,
please see page 13.

Min. 2 cm

Min. 3 mm

0.578348s