Denon Denon DJ Equipment DN-X1600 User's Manual | Page 9

Denon DJ Equipment User's Manual - Denon DJ Equipment DN-X1600.
Download
Page  of 32
4.6, 2370 votes
background image

5

Get

ting Star

te

d

Connections

Basic Oper

ations

Specifi

 cations

Tr

oubleshooting

Ef

fect
or F

unction

Fader Start

Utility

USB

Getting Started

ENGLISH

Q5 Effect ON/OFF button 

Sets the EFX effects to ON/OFF.

Q6 Channel EFX SEND button

The various set effects can be obtained for the 
channel audio signal. 
Multiple channels can be selected.

Q7 Channel CUE buttons 

Pressing in any or all of 

CUE buttons routes the 

respective source to the headphone and meter 
cue sections. When the CUE button is pressed 
multiple times, the channels selected by the 
CUE button are mixed.

• The SOLO mode with no signals mixed can 

also be selected as a preset.

Q8 CROSSFADER ASSIGN switches

A, B:
The channel source is assigned to A or B of the 
Crossfader.

THRU:
Select when you don’t assign the channel 
source into the Crossfader.

Q9 CROSSFADER

Controls the relative output level from the 
summed A and B Mixes. When the fader is 
at its far left, only the A Mix is heard from the 
Outputs. As the fader is moved toward the 
right, the amount of B Mix is increased and the 
amount of A Mix is decreased. When the fader 
is centered, equal amounts of A and B Mixes are 
routed to the Outputs. Fully right is all B Mix at 
the Outputs.

W0 Channel input fader (CH FADER)

Controls the level of the selected Input.

W1 HEADPHONE output jack

Accepts 1/4” stereo headphone plugs.

W2 HEADPHONE level control

Adjusts the volume for the headphones.

W3 HEADPHONE PAN control

This is used to adjust the balance between the 
CUE sound and the master sound which are 
monitored using the headphones.

W4 SPLIT CUE button

There are two headphone monitor modes.

SPLIT CUE OFF:
The cue signals and master signals can be 
monitored in stereo.

SPLIT CUE ON:
The monaural cue signals are heard through 
the left channel of the headphones, and the 
monaural master signals through the right 
channel.

W5 CROSSFADER CONTOUR control

Allows adjusting the “shape” of the Crossfader 
response from a gentle curve for smooth, long 
running fades, to the steep pitch required for top 
performance cut and scratch effects.

W6 CH FADER CONTOUR control

Adjusts the volume curve response of the 
channel fader.

W7 CH FADER START switch

This function will start the performance of CD/
Media Player with Ch. Fader automatically is 
ON/OFF.

W8 CROSSFADER START switches

Use this to switch the Crossfader Start function 
ON and OFF.

W9 MIC SEND LEVEL control

This is used to adjust the level at which the mic 
signals are sent to the master output.

E0 Mic EFX INS button

This button enable the various effects to be 
obtained for the mic input signals. 

E1 MIC EQ controls

Adjusts the frequency of the mic input. 

E2 DUCKING ON/OFF button

• Use this to switch the Talk Over function ON 

and OFF. (ON/OFF is cyclic)

• When the button is lit, level of signals except 

Mics is attenuated.

• The ducking attenuation level can be adjusted 

in the “UTILITY” mode.

E3 MIC1, MIC2 TRIM controls

Adjusts the level of the Main Mic input.

E4 MIC1, 2 buttons

When the button’s LED is lighted, the mic 
signals take effect.

E5 SOURCE SEL LN1/LN2/LN3/LN4/USB/P1–4  

controls (channel input selector)
These enable any of six inputs to be selected 
for each of the channels. The same input can be 
selected for more than one channel. 

LINE1

SOURCE SEL

CH1

CH4

SOURCE SEL

LINE2
LINE3
LINE4

USB 1/2 - 7/8

USB P1 - P4

The desired USB source from USB P1–P4 can 
be selected from USB 1/2–7/8 and DVS from the 
utility mode preset control.

E6 CD/PHONO line input selector buttons

These enable the line input of each channel to 
be selected as CD or PHONO.

CD:
Rear panel LINE1–4 CD terminal input

PHONO:
Rear panel LINE2–4 PHONO terminal input

• LINE1 is only for the CD terminal input.

E7 Channel input LEVEL controls 

These are used to adjust the levels of the 
selected inputs.

E8 MIDI layer selector buttons 

When these buttons are set to ON, the controls 
of the selected channels function as MIDI 
controllers. 

E9 Channel isolator EQ controls (HI, MID, LOW)

These are used to change the frequency 
response of the selected inputs.
At the center position, the frequency response 
is fl at.
At the –∞ position, the frequencies of all the 
bands are cut off completely.

R0 CH LEVEL meter

Displays the input level after adjusted with 
LEVEL E7 and Source EQ E9 controls.

R1 MASTER BALANCE control

Adjusts the L/R balance of the MASTER output.

R2 L/CUE, R/PGM master level meter

One of two modes can be selected for display 
on this meter.

SPLIT CUE OFF:

The master output audio level is displayed.

SPLIT CUE ON:

The right channel master CUE (monaural) and 

left channel CUE (monaural) audio levels are 

displayed.

R3 SIG/PK indicator

This is the signal/peak meter for the mic input 
level.

Off:
No signals input (under –60 dB/FS)

Green:
Signal input (–60 dB/FS to under –20 dB/FS)

Orange:
Suitable signal input level (–20 dB/FS to under 
–6 dB/FS)

Red:
Excessively high signal input level (above –6 dB/
FS)

R4 MIDI button

Pressing this button makes the EFX control 
function as the MIDI controller.

R5 MIDI parameter control

Controlling each button outputs the MIDI 
command. 

R6 MIDI function buttons (FUNC1/2/3/4)

Controlling each button outputs the MIDI 
command. Pressing the MIDI function button 
while pressing the MIDI button makes it possible 
to switch the MIDI page. Different commands 
can be output when the MIDI page is switched.

0.511334s