Denon Denon DJ Equipment DN-X1600 User's Manual | Page 8

Denon DJ Equipment User's Manual - Denon DJ Equipment DN-X1600.
Download
Page  of 32
4.6, 2370 votes
background image

4

Get

ting Star

te

d

Connections

Basic Oper

ations

Specifi

 cations

Tr

oubleshooting

Ef

fect
or F

unction

F

ader Star

t

Utility

USB

Getting Started

ENGLISH

q MASTER LEVEL control

Adjusts the level of the MASTER outputs.

w Master EFX INS button

This button enable the various effects to be 
obtained for the master output signals. 

e BOOTH LEVEL control

Adjusts the level of the BOOTH outputs.

r USB ASSIGN CH/MASTER indicator

This displays the assignment destination of 
the USB Audio input signal supplied from the 
computer. 
Assignment destination settings for Ch and 
Master are selected from the USB Assign items 
in the preset controls in the utility mode.

CH:

• Displayed when CH (1–4) are assigned.

MASTER:

• Displayed when assigned to the master bus 

and monitor bus. 

t MIDI CLK / V-LINK button

This enables the MIDI clock corresponding to 
the BPM value to be sent from the USB MIDI 
and MIDI output terminals to the computer 
(software) or external device.

START:

Sending the MIDI clock is started.

STOP:
Sending the MIDI clock is stopped.

• Press for more than one second to switch 

V-LINK ON/OFF. 

y UTILITY/–USB A/USB B button

This allows the presets to be set and the system 
information to be set, changed or referenced.

• When it is held down for more than a second, 

the USB mode switching screen is opened, 
and the USB device mode or USB host mode 
can be selected.

u BEAT 

 buttons

(Short) :

The beat/time is decreased.

(Long) :

The beat/time is increased.

i TAP/LOCK/AUTO/INPUT BPM button

TAP:
When this button is tapped repeatedly, the BPM 
is measured using the intervals between taps.

LOCK:
When the button is pressed once in the 
auto BPM mode, the BPM value measured 
automatically is locked.

AUTO BPM:
When the button is held down for one second, 
the auto BPM mode is established, and the 
measured BPM value is displayed.

INPUT BPM:
When it is held down for two or more seconds, 
the BPM input mode is established, and the 
BPM value can be input directly using the 
u BEAT 

 buttons. When it is pressed 

again, the mode is released.

oEffect CUE button

When the CUE button is set to ON, the sound of 
the effects can be monitored even if the effect 
is OFF. 
(Excluding ECHO, REVERB, and ECHO 
REVERB.)

Q0 TIME/BACK button

TIME: 
This button is used to select whether to change 
the effects produced using the u BEAT 

 buttons on the basis of the number of beats 

or time.

BACK:
This is used when returning to the previous 
screen while setting screen operations are 
being performed.

Q1 EFX SELECT control

This is for selecting the effect to be used.
Refer to the effect functions (page 12).

Q2 PARAMETER MIN/MAX control

This is used to adjust the fi lter cutoff frequency 
and other effector parameters. The parameters 
are changed by the effector selected.

Q3 Parameter ON/OFF button

This is used to control the ON and OFF settings 
of the effect parameters.

Q4 DRY/WET control

Use this to adjust the ratio of original and 
effected sound.

Part Names and Functions

Top Panel

R3

E3

E2

E1

W9

E0

W6

W7

W4
W3

W2

W1

W0

Q9

R4

Q7

Q8

Q1

o

Q3

Q4

Q5

Q2

Q0

u

i

Q6

E9

r

R5

y

e

q

w

R2

R1

E7

E6

E5

E4

E8

R6

t

W5

W8

R0

0.497084s