Dell Solaris 10 Operating System Owner's Manual

Dell Software Owner's Manual - Solaris 10 Operating System.
Download
Page  of 4
4.7, 1910 votes
background image

Information Update for the Solaris™ 

10 Operating System

Creating Virtual Drives on a System With a Dell™ 

SAS 6/iR Controller
On a system with a Dell SAS 6/iR controller, a firmware conflict may prevent you 

from configuring virtual drives using the lsiutil and raidct1 commands in the 

Solaris operating system. The system may issue an Operation failed error 

message and place the physical drives in an offline state.

Workaround:
Configure virtual drives using the SAS configuration utility. To access the SAS 

configuration utility, press <Ctrl-C> when prompted during the BIOS boot 

sequence.

Dell PERC 6 Support
If the device driver for Dell PERC 6 controller is not included with the Solaris 

operating system, navigate to your system driver download page on 
support.dell.com 

and follow the instructions for downloading and installing the 

drivers.

Installing the EMC® PowerPath® Driver on a 

System With a PERC 6/i or CERC6 Controller
A system running Solaris 10 update 5 with a PERC 6/i or CERC6 as a boot 

controller may fail to boot after installation of the EMC PowerPath driver. The 

fix for this issue will be included in future releases or updates of the Solaris 

operating system. Following is the workaround for this issue.

July 2008

Related Manuals for Dell Solaris 10 Operating System

0.568753s