Dell PowerEdge Rack Enclosure 4620S Installation Manual

Dell Servers Installation Manual - PowerEdge Rack Enclosure 4620S.
Download
Page  of 20
4.4, 1991 votes
background image

About Warnings

 

WARNING: A WARNING indicates a potential for property damage, personal injury, 

or death.

Installing the Rack Stabilizer Feet

 

WARNING: Installing systems in a rack without the front and side stabilizer feet 

installed could cause the rack to tip over, potentially resulting in bodily injury under 
certain circumstances. Therefore, always install the stabilizer feet before installing 
components in the rack.

 

WARNING: After installing systems in a rack, never pull more than one system out of 

the rack on its slide assemblies at one time. The weight of more than one extended 
system could cause the rack to tip over and cause injury.

 

WARNING: For stability, you must ensure that a minimum of 50 lbs. is installed in the 

bottom 3-U spaces of the rack cabinet.

 

NOTE: For complete rack installation instructions, see your rack installation guide. 

The stabilizer feet help prevent the rack from tipping over when a system 
or other component is pulled out of the rack with the slide assemblies fully 
extended. 

Install stabilizer feet on the rack as follows:

Install front and side stabilizer feet on a standalone rack.

Install front stabilizer feet on all racks in a suite, and install left or right 
stabilizer feet on the racks at each end of a suite.

Recommended Tools and Supplies
You may need the following tools and supplies to install the rack:

12-mm wrench

Keys to the rack doors and side panels

October 2008

Related Manuals for Dell PowerEdge Rack Enclosure 4620S

0.533633s