Dell PowerEdge M805 Installation Information

Dell Servers Installation Information - PowerEdge M805.
Download
Page  of 7
4.3, 1801 votes
background image

Processor Heat Sink 

Installation Information

 

NOTICE: Only trained service technicians are authorized to remove the system cover 

and access any of the components inside the system. See your Product Information 
Guide for complete information about safety precautions, working inside the computer, 
and protecting against electrostatic discharge.

 

NOTICE: The processor and heat sink can become extremely hot. Be sure the 

processor has had sufficient cooling time to cool before handling.

Do not over-tighten the heat sink retention screws when installing the heat sink. 
To prevent over-tightening, Dell recommends that you tighten the retention 
screw until resistance is felt and stop once the screw is seated. The screw tension 
should be no more than 6 in-lb (6.9 kg-cm).

____________________

Information in this document is subject to change without notice.
© 2007 Dell Inc. All rights reserved. Printed in Ireland.

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: 

Dell and the DELL logo are trademarks of Dell Inc.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the 
marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade 
names other than its own.

November 2007

D802Cem0.fm  Page 9  Friday, November 30, 2007  11:17 AM

Related Manuals for Dell PowerEdge M805

0.500435s