Dell PowerConnect W-7200 Series Wall Mount Kit Installation Manual

Dell Servers Installation Manual - PowerConnect W-7200 Series Wall Mount Kit.
Download
Page  of 5
4.5, 2009 votes
background image

Dell PowerConnect W-7200 Series Wall Mount Kit

Installation Guide

0511265-01 | February 2013

1

Required Tools and Equipment
Installation of a Dell PowerConnect W-7200 Series controller on a wall requires the following items that are 
included in the kit unless specified otherwise.

2x Wall Mount Brackets

1x Power Supply Funnel

8x M4 x 8mm Phillips Flat Head Screws

2x EMI Clip

Suitable Screwdrivers for both screw types (not included)

Wall Anchors (optional, not included)

Wall Mounting Screws (not included, the type of screw depends on your installation surface)

Installation Steps
To install a W-7200 Series controller on a wall:

1. Remove any installed power supplies.
2. Attach the included EMI clips by sliding it over the edge of the power supply slot (see Figure 1). Install one 

clip in each slot.

Figure 1  EMI Clip Installation

3. Fasten the wall mount brackets over the mounting holes on the sides of the wired AP using the included M4x 

6mm phillips head screws and a Phillips Head screwdriver, as shown in Figure 2.

NOTE:  The Ethernet ports must be facing down when installing your W-7200 Series controller on a wall.

7200_014

Related Manuals for Dell PowerConnect W-7200 Series Wall Mount Kit

0.481458s