Dell Latitude E4200 (Late 2008) User's Manual

Dell Laptops User's Manual - Latitude E4200 (Late 2008).
Download
Page  of 2
4.1, 1968 votes
background image

Replacing the Bottom Access Panel

About Cautions

 

CAUTION: A CAUTION indicates a potential for property damage, personal injury, 

or death.

 

CAUTION: Before you begin any of the procedures in this section, read the safety 

information that shipped with your computer. For additional safety best practices 
information, see the Regulatory Compliance Homepage at 
www.dell.com/regulatory_compliance.

 

NOTICE: If you need to remove the computer cover, first disconnect the computer 

power and modem cables from all electrical outlets.

To replace the bottom access panel of your computer, you need the 
iAMT configuration-mode number that is located on the original bottom 
access-panel of your computer. 

Follow the instructions on this tech sheet carefully to ensure that you:

Remove the original bottom access-panel from your computer (see your 

Service Manual).

Select the correct label that is provided in the replacement kit.

Install the label in the correct location on the replacement bottom 
access-panel. 

To replace the bottom access panel:

1 Remove the original bottom access-panel from your computer (see your 

Service Manual).

 

NOTE: If the original iAMT configuration-mode label is missing, damaged, 

or otherwise illegible, contact Dell to obtain your iAMT configuration-mode 
number (see your Setup and Quick Reference Guide for contact information). 

June 2008

T539H0am0-edited.fm  Page 1  Tuesday, November 3, 2009  4:57 PM

0.508413s