DEFY DDW 157 User's Manual | Page 2

DEFY Dishwasher User's Manual - DDW 157.
Download
Page  of 18
4.7, 2318 votes
background image

2

You are now the proud owner of one of

the finest and most modern products that

today's technology can produce.

Please read all the instructions carefully

as they contain information on how to

operate and care for your dishwasher so

that you may gain the maximum benefit

from it.

Store this book in a safe place for future

reference.

Unpacking

Remove all packaging material, accessories

and documentation from the machine.

Damage

Do not use the machine if it has been

damaged in transit. Report the damage

to your dealer, who will take the necessary

corrective action.

Positioning the dishwasher

The machine should be positioned in close

proximity to a cold water tap and a drain

outlet.

Adjust the feet by turning them in or out

until the machine stands level and stable.

Preparation

Every dishwasher is tested and run in the

factory before being dispatched. Before

washing dishes for the first time, it is

advisable to first complete a pre-wash

cycle to flush any factory related residuals

from the system.

The machine should be connected to a 15

Amp, 230 Volt 50 Hz, earthed, 3 pin wall

socket.

For safety reasons, the wall socket and

the plug should be accessible after

installation.

If the power cord should ever need

replacing, use only a genuine cord available

from the nearest Defy Service Centre.

The machine must be earthed and the

manufacturer and seller do not accept

responsibility for any damage due to

incorrect electrical connection.

Connect the filler hose to a 3/4 gas

threaded cold water tap.

The water supply pressure must be

between 0.3 and 10 bars.

If the supply plumbing is new or has not

been used for some time, it is advisable

to run the water until it is clear and free

from dirt.

Secure the end of the drain hose to a

drain pipe. Take care not to kink or twist

the drain hose.

Dear

Customer

Before use

Electrical

connection

Water

connection

Drain

requirements

320 mm minimum

800 mm maximum

Floor level

diameter

40 mm inside

Drain hose

Drain pipe

0.548220s