DEFY 600 UMS User's Manual | Page 9

DEFY Ovens User's Manual - 600 UMS.
Download
Page  of 16
4.4, 1162 votes
background image

 

9

 

Red dot plates 

   Plates featuring a red dot in the centre are high speed, 

wattage plates for increased 

 

   For your safety these plates are fitted with thermal 

Should a plate be accidentally switched on and left 

the limiter will reduce the power output of the plate and 

mise the risk of overheating and the possibility of   

Solid plates   

Caring for Solid Plates  

   Before using the plates for the first time, switch them on for about 4 minutes at the 

est setting. This allows the factory applied protective coating to burn   

   To prevent blotchy discolouration and corrosion, moisture from spatters and 

should be cleaned off 

  

   To clean the plates, wipe them with a damp cloth or nylon pad. A little liquid 

may be used. Do not use metal scourers or sharp metal objects to clean the 

  

   After cleaning, dry the plates by switching them on for a short 

 

   To prevent rust, periodically apply some, sewing machine oil or electrical hotplate 

ish  -  available from Defy Service Centres. Extra attention is required in areas of 

humidity or in close proximity to the    

 

 

 

 

  

  

  

  

  

Recommendations 

   Use only pots with a solid level base. An uneven base can prolong cooking times 

waste  energy.   

   Use pots with a  base diameter slightly larger than the plate. This will ensure even 

distribution and prevent spillage from dripping onto and staining the hot 

 

   Always cover the pot with a lid. This will conserve energy and minimise 

  

   Thermal shock could damage the plates. Do not put cold pots on very hot 

  

  

   Plate controls   

   Select the heat level by turning the relevant plate control knob to the required 

  

   The higher the number selected, the hotter the temperature of the plate will 

   The plate indicator light will glow when a plate is switched 

NOTE: THE WARRANTY DOES NOT COVER THE REPLACEMENT  

  

OR REPAIR OF  RUSTED OR CORRODED PLATES.