Curtis Klu LT7035-F User's Manual | Page 5

Curtis Media Tablets & eBooks Readers User's Manual - Klu LT7035-F.
Download
Page  of 47
4.9, 1660 votes
background image

Setting up for the first time                                                                                                                   
Charging your device

 

For first-time use, you need to charge the device for ten hours.   

After that you can recharge the device as needed.   

Connect the DC-in jack to your device and plug the AC adapter into any AC outlet.   

TIPS :   

1. This device adopts built-in polymer battery. Only the specified charger should be used.   

2. It is normal for the device’

s surface to become warm during charging or long   

periods of use. All devices are factory tested before release. 

3. If you do not use this set for a long time, please charge/release it once   

one month to avoid deep discharge. The damage caused by battery over-consuming is not included in the warranty. 

 

Battery Saving 

To save battery running life, please see below key points. With below suggestions, battery can run longer time after fully charged 

each time. 

1.  When device is not in use, press power button once to go to sleep mode. 

2.  Shut down the applications when not in use. 

3.  Turn of  WLAN when not in use 

4.  Shut of  application sync selection 

5.  Set a shorter time for display backlight 

6.  Reduce brightness of display 

 

 

 

 

 

 

Related Manuals for Curtis Klu LT7035-F

0.614460s