Craftsman XSP 12 Gallon 5.5 Peak HP Wet/Dry Vac Owner's Manual | Page 9

Craftsman Wet-Dry Vacs Owner's Manual - XSP 12 Gallon 5.5 Peak HP Wet/Dry Vac.
Download
Page  of 30
4.4, 1133 votes
background image

9

Operation (continued)

Blowing Feature

WARNING:   Always wear safety goggles complying with ANSI Z87.1 (or in 
                     Canada, CSA Z94.3) before using blower.

WARNING:   Keep bystanders clear from blowing debris.

WARNING:   Wear a dust mask if blowing creates dust that might be inhaled. 

!

!

!

This Wet/Dry Vac has blowing capabilities.
To use the blower feature follow the
instructions listed.
1.  Verify that the power cord is
     disconnected from the outlet. (Fig. 1)
2.  Make sure the collection tank is empty
     before using as a blower.
3.  Remove hose from the vacuum port.
4.  Insert the larger end of the hose into the
     blowing port on the back side of the
     power head. (Fig. 2)
5.  Fit the desired attachment to the hose.
     (Fig. 3)
6.  Verify that the power switch is in the ‘O’
     OFF position before plugging the power
     cord into the outlet. (Fig. 4, Fig. 5)
7.  Before turning ON the vac, fi rmly hold
     the loose end of the hose. Turn the
     motor on by pressing the switch to the ‘I’
     ON position. (Fig. 6)
8.  Once you have completed blowing,     
     press the power switch to the 'O' (OFF)
     position and unplug the power cord
     from the outlet. (Fig. 7)

6

2

4

3

5

1

7

Also See for Craftsman XSP 12 Gallon 5.5 Peak HP Wet/Dry Vac

0.552326s