Craftsman Premium Heavy-Duty 6-Ft. Workbench with Stainless Steel Top Instruction Manual | Page 4

Craftsman Work Benches Instruction Manual - Premium Heavy-Duty 6-Ft. Workbench with Stainless Steel Top.
Download
Page  of 10
4.1, 2021 votes
background image

Process:
•  Place the workbench in its upright position.
•  Attach Back Stop to back of workbench top using (6) 

#14-10 x 5/8" Hex screws by aligning the holes in the 
backstop with the pre-drilled holes in the bottom of the 
workbench top. 

NOTE: On some units two of the holes required are not 
pre-drilled. You will need to predrill the holes prior to 
attaching the screws. Using the back stop as a guide, use 
a 7/32" DIA drill and drill a 1" deep hole at each end of the 
back splash.

•  Wrench tighten all screws securely. Do not over tighten.

4

OPERATION

Items Needed:
Back Stop (Qty: 1)
#14-10 x 5/8" Hex Screw (Qty: 6)

Leveling Foot Adjustment
•  Adjust leveling foot to desired position with a 5/8" open 

end wrench as shown.

Some units may need 

to have these holes 

added

Process:
•  Attach Rail as shown using (4) 5/16-18 x 3-1/2" carriage 

bolts and (4) 5/16-18 Flange nuts. Flanges of rail should 
face towards the front of the workbench. Adjust back Leg 
Weldment to desired height before attaching bolts.

Items Needed:
Rail (Qty:1)
5/16-18 x 3-1/2" Carriage Bolt (Qty :4)
5/16-18 Flange Nut (Qty:4)

Related Manuals for Craftsman Premium Heavy-Duty 6-Ft. Workbench with Stainless Steel Top

0.576239s