Craftsman C3 19.2 volt Lithium-Ion Battery Charger Owner's Manual | Page 7

Craftsman Batteries and Chargers Owner's Manual - C3 19.2 volt Lithium-Ion Battery Charger.
Download
Page  of 16
4.8, 2002 votes
background image

7 — English

OPERATION

CHARGING A COOL BATTERY PACK
A cold battery pack may be placed directly onto the 
charger port but charging will not begin until the battery 
temperature warms to within acceptable temperature 
range. When a cold battery pack is placed on the charger, 
the red LED will begin flashing and the green LED will be 
off. When the battery pack warms to approximately 32°F 
(0°C), the charger will automatically begin charging.

FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions: 
1.  This device may not cause harmful interference, and
2.  This device must accept any interference received, 

including interference that may cause undesired 
operation.

This equipment has been tested and found to comply 
with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC rules. These limits are designed to 

provide reasonable protection against harmful interference 
in a residential installation. This equipment generates, 
uses, and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. 
However, there is no guarantee that the interference will 
not occur in a particular installation. If this equipment 
does cause harmful interference to radio or television 
reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following 
measures:

  Reorient or relocate the receiving antenna. 

  Increase the separation between the equipment and 

receiver. 

  Connect the equipment into an outlet on a circuit 

different from that of the receiver. 

  Consult the dealer or an experienced radio/TV 

technician for help.

MAINTENANCE

WARNING:  Do not at any time let brake fluids, 

gasoline, petroleum-based products, penetrating 
oils, etc., come in contact with plastic parts. 
Chemicals can damage, weaken or destroy plastic 
which may result in serious personal injury.

STORAGE
Always remove the battery pack before storing the 
charger or any time the charger is unplugged.

WARNING: When servicing, use only identical 

replacement parts. Use of any other parts could 
create a hazard or cause product damage.

WARNING:  To avoid serious personal injury, always 

remove the battery pack from the tool when cleaning 
or performing any maintenance.

GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most 
plastics are susceptible to damage from various types of 
commercial solvents and may be damaged by their use. 
Use clean cloths to remove dirt, dust, oil, grease, etc.

0.594146s