Craftsman C3 19.2-Volt High Capacity Lithium-Ion Battery Pack Owner's Manual

Craftsman Batteries and Chargers Owner's Manual - C3 19.2-Volt High Capacity Lithium-Ion Battery Pack.
Download
Page  of 4
4.7, 1319 votes
background image

English

 

WARNING! Read and understand all 

instructions. Failure to follow all instructions listed 

below, may result in electric shock, fire and/or 

serious personal injury.

Battery tools do not have to be plugged into an 

electrical outlet; therefore, they are always in 

operating condition. Be aware of possible hazards 

when not using your battery tool or when changing 

accessories. Following this rule will reduce the risk of 

electric shock, fire, or serious personal injury.

Do not place battery tools or their batteries near 

fire or heat. This will reduce the risk of explosion and 

possibly injury.

Do not crush, drop or damage battery pack. Do 

not use a battery pack or charger that has been 

dropped or received a sharp blow. A damaged 

battery is subject to explosion. Properly dispose of a 

dropped or damaged battery immediately.

Batteries can explode in the presence of a source 

of ignition, such as a pilot light. To reduce the risk 

of serious personal injury, never use any cordless 

product in the presence of open flame. An exploded 

battery can propel debris and chemicals. If exposed, 

flush with water immediately.

Do not charge battery tool in a damp or wet 

location. Following this rule will reduce the risk of 

electric shock.

Charge only with Craftsman dual-chemistry 

battery chargers. Use of other chargers may result in 

personal injury, fire, or damage

.

Do not charge battery in an area of extreme 

heat or cold. It will work best at normal room 

temperature. To reduce the risk of serious 

personal injury, do not store outside or in vehicles.

Under extreme usage or temperature conditions, 

battery leakage may occur. If liquid comes in 

contact with your skin, wash immediately with 

soap and water. If liquid gets into your eyes, flush 

them with clean water for at least 10 minutes, then 

seek immediate medical attention. Following this 

rule will reduce the risk of serious personal injury.

When battery pack is not in use, keep it away 

from other metal objects like: paper clips, coins, 

keys, nails, screws, or other small metal objects 

that can make a connection from one terminal to 

another. Shorting the battery terminals together may 

cause sparks, burns, or a fire.

Always remove battery pack from your tool when 

you are assembling parts, making adjustments, 

cleaning, or when not in use. Removing battery 

pack will prevent accidental starting that could cause 

serious personal injury.

Always remove battery pack before storing the 

device.

Always wear eye protection with side shields 

marked to comply with ANSI Z87.1. Failure to do 

so could result in objects being thrown into your eyes 

and other possible serious injuries.

Keep battery pack dry, clean, and free from oil and 

grease. Always use a clean cloth when cleaning. 

Never use brake fluids, gasoline, petroleum-based 

products, or any solvents to clean battery pack.

Save these instructions. Refer to them frequently 

and use them to instruct others who may use this 

tool. If you loan someone this tool, loan them these 

instructions.

CALIFORNIA PROPOSITION 65 

 

WARNING: This product may contain chemicals, 

including lead, known to the state of California to 

cause cancer, birth defects or other reproductive 

harm. 

Wash hands after handling.

LITHIUM-ION BATTERY PACKS
Lithium-ion batteries deliver fade free power for their 

entire run time. Lithium-ion tools will not gradually lose 

power due to decreasing battery charge. Instead, power 

from the battery pack will drop from full to zero once the 

full charge has been drained from the battery. Once this 

happens, recharging of the battery is required.
It is not necessary to drain the battery pack completely 

before recharging.

BATTERY PROTECTION FEATURES
Lithium-ion battery packs are designed with features that 

protect the lithium-ion cells and maximize battery life.
If the tool stops during use, release the trigger to reset 

and resume operation. If the tool still does not work, the 

battery needs to be recharged.

COLD WEATHER OPERATION
The lithium-ion battery pack can be used in temperatures 

down to 32°F (0°C). Put the battery pack on a tool and use 

the tool in a light duty application. After about a minute, 

the pack will warm up and begin operating normally.

SAFETY RULES

OPERATION

To register your Craftsman product, please visit: 

http://www.sears.com/craftsman
Use this battery pack for Craftsman 19.2V Lithium-ion 

cordless products only. Refer to the Operator’s Manual 

provided with product. Always mention the model number 

above when communicating with us regarding this battery 

pack.

19.2 VOLT 

LITHIUM-ION 

BATTERY PACK 
315.PP2011 

315.PP2025
315.PP2012

0.554903s