Craftsman C3 19.2-Volt 7 1/4-in. Cordless Miter Saw Owner's Manual | Page 9

Craftsman Circular Saw Owner's Manual - C3 19.2-Volt 7 1/4-in. Cordless Miter Saw.
Download
Page  of 60
4.5, 1301 votes
background image

9 — English

45

33.9

30

15

1

2

3

4

5

6

7

FEATURES

Fig. 3

KNOW YOUR COMPOUND MITER SAW
See Figure 1.
The safe use of this product requires an understanding of 
the information on the tool and in this operator’s manual 
as well as a knowledge of the project you are attempt-
ing. Before use of this product, familiarize yourself with all 
operating features and safety rules.
7-1/4 in. BLADE
A 7-1/4 in. blade is included with the compound miter 
saw. It will cut materials up to 1-1/2 in. thick or 4-1/4 in. 
wide, depending upon the angle at which the cut is being 
made.
BEVEL LOCK KNOB
The bevel lock knob securely locks your compound miter 
saw at desired bevel angles. Positive stop adjustment 
screws have been provided on each side of the saw arm. 
These adjustment screws are for making fine adjustments 
at 0° and 45°.
BLADE WRENCH STORAGE
A blade wrench is packed with the saw. One end of the 
wrench is a phillips screwdriver and the other end is a 
hex key. Use the hex key end when installing or removing 
blade and the phillips end when removing or loosening 
screws. A storage area for the blade wrench is located in 
the saw’s base.
MITER FENCE
The miter fence on the compound miter saw has been  
provided to hold your workpiece securely against when  
making all cuts. 

MITER LOCK LEVER
See Figure 2.
The miter lock lever securely locks the saw at desired 
miter angles.
POSITIVE STOPS ON MITER TABLE
Positive stops have been provided at 0°, 15°, 22-1/2°, 
31.62°, and 45°. The 15°, 22-1/2°, 31.62°, and 45° positive 
stops have been provided on both the left and right side 
of the miter table.

REAR BRACKET/CARRYING HANDLE
See Figure 2.
For convenience when carrying or transporting the miter 
saw from one place to another, a carrying handle has been 
provided at the rear of the saw. To transport, turn off and 
remove the battery pack from the tool, then lower the saw 
arm and lock it in the down position. Lock saw arm by 
depressing the lock pin.

Fig. 2

SAW ARM LOCKED  

IN DOWN POSITION

SPINDLE 

LOCK BUTTON

SWITCH 

TRIGGER

LOCK 

PIN

REAR BRACKET/

CARRYING HANDLE

MITER 

LOCK LEVER

“D” HANDLE

SELF-RETRACTING LOWER BLADE GUARD
The lower blade guard is made of shock-resistant, see-
through plastic that provides protection from each side 
of the blade. It retracts over the upper blade guard as the 
saw is lowered into the workpiece.
SPINDLE LOCK BUTTON
See Figure 3.
The spindle lock button locks the spindle stopping the 
blade  from rotating. Depress and hold the lock button 
while installing, changing, or removing blade.

Related Manuals for Craftsman C3 19.2-Volt 7 1/4-in. Cordless Miter Saw

0.599306s