Craftsman C3 1/2-In Heavy-Duty Drill Kit Powered by XCP Owner's Manual | Page 10

Craftsman All Cordless Power Tools Owner's Manual - C3 1/2-In Heavy-Duty Drill Kit Powered by XCP.
Download
Page  of 24
4.4, 1852 votes
background image

10 - English

mAInTEnAncE

WARnIng: When servicing, use only identical 

Craftsman replacement parts. Use of any other part 
can create a hazard or cause product damage.

WARnIng: Always wear eye protection with side 

shields marked to comply with ANSI Z87.1. Failure to 
do so could result in objects being thrown into your 
eyes resulting in possible serious injury.

WARnIng: To avoid serious personal injury, 

always remove the battery pack from the tool when 
cleaning, performing any maintenance, or when 
storing the tool.

gEnERAL mAInTEnAncE
Avoid using solvents when cleaning plastic parts. Most 
plastics are susceptible to damage from various types of 
commercial solvents and may be damaged by their use. 
Use clean cloths to remove dirt, dust, oil, grease, etc.

WARnIng: Do not at any time let brake fluids, 

gasoline, petroleum-based products, penetrating 
oils, etc., come in contact with plastic parts. 
Chemicals can damage, weaken or destroy plastic 
which could result in serious personal injury.

Only the parts shown on the parts list are intended to 
be repaired or replaced by the customer. All other parts 
should be replaced at a Sears Service Center.

BATTERY PAck REmOVAL AnD PREPARATIOn 
FOR REcYcLIng

WARnIng: Upon removal, cover the battery pack’s 

terminals with heavy-duty adhesive tape. Do not 
attempt to destroy or disassemble battery pack or 
remove any of its components. Batteries must be 
recycled or disposed of properly. Also, never touch 
both terminals with metal objects and/or body parts 
as short circuit may result. Keep away from children. 
Failure to comply with these warnings could result in 
fire and/or serious injury.

cHuck REmOVAL
See Figures 12 - 14, page ii.
The chuck may be removed and replaced by a new one.
 

Lock the switch trigger by placing the direction of 
rotation selector in center position. 

 

Insert a 5/16 in. or larger hex key into the chuck of the 
drill and tighten the chuck jaws securely.

 

Tap the hex key sharply with a mallet in a clockwise 
direction. This will loosen the screw in the chuck for 
easy removal.

 

Open the chuck jaws and remove the hex key.

 

Using a screwdriver, remove the chuck screw by 
turning it in a clockwise direction.

 

nOTE:  The chuck screw has left hand threads.

  Insert the hex key into the chuck and tighten the 

chuck jaws securely. Tap sharply with a mallet in a 
counterclockwise direction. This will loosen the chuck 
on the spindle. It can now be unscrewed by hand.

TO RETIgHTEn A LOOSE cHuck
The chuck may become loose on the spindle and develop 
a wobble. Also, the chuck screw may become loose, 
causing the chuck jaws to bind and prevent them from 
closing.
To tighten:
 

Lock the switch trigger by placing the direction of 
rotation selector in the center position. 

  Open the chuck jaws.

 

Insert the hex key into the chuck and tighten the chuck 
jaws securely. Tap the hex key sharply with a mallet in 
a clockwise direction. This will tighten the chuck on the 
spindle.

 

Open the chuck jaws and remove the hex key.

 

Using a screwdriver, tighten the chuck screw by 
turning in a counterclockwise direction.

Related Manuals for Craftsman C3 1/2-In Heavy-Duty Drill Kit Powered by XCP

0.568702s