Craftsman 40-inch 1-Drawer Premium Heavy-Duty Middle Chest - Black Owner's Manual | Page 2

Craftsman Intermediate Chests Owner's Manual - 40-inch 1-Drawer Premium Heavy-Duty Middle Chest - Black.
Download
Page  of 8
4.4, 1688 votes
background image

#14 - 10 x 3/4 Cross-tip Screw 
(Qty: 4)

#14 - 10 x 5/8-in Hex Screws 
(Qty: 16)

HARDWARE INCLUDED:
26-INCH CABINET HARDWARE

CASTER INSTALLATION (26-INCH CABINET)

TOOLS REQUIRED:

3/8-in Wrench
7/16-in Wrench
Cross-tip Screwdriver

Items Needed:
#14 - 10 x 5/8-in Hex Screws (Qty: 16)
3/8-in Wrench

NOTE: Not all assembly instructions will relate to your model.

SIDE HANDLE ATTACHMENT

Items Needed:
#14 - 10 x 3/4 Cross-tip Screw (Qty: 4)
Cross-tip Screwdriver
Process:
•  Attach the side handle using (4) #14 - 10 x 3/4 Cross-tip 

screws.

•  Hand tighten. Do not overtighten.

Process:

NOTE: Use adequate personnel for this operation.

NOTE: Failure to install caster channels may result in 
premature cabinet failure.

•  Place the unit on its top. Use packaging material to 

protect the paint finish.

•  Position caster channels on the cabinet. Notched flanges  

should be toward the outside and pointed up.

•  Attach casters and caster channels using (4) #14 - 10 

x 5/8 Hex Screws for each caster. Mount both swivel 
casters on the same side of the cabinet as the side 
handle.

•  Wrench tighten all screws. Do not overtighten.
•  Return the unit to its upright position.

1/4 - 20 x 5/8 Screw (Qty: 16)

#14 - 10 x 3/4-in Screws 
(Qty: 16)

HARDWARE INCLUDED:
40- & 52-INCH CABINET HARDWARE

1/4-in Nut (Qty: 16)

Notches 
in front

Caster channels

Notches 
in back

HARDWARE

2

ASSEMBLY

CASTER INSTALLATION (40-INCH CABINET)
Items Needed:
1/4 - 20 x 5/8 Screw (Qty: 16)
1/4-in Nut (Qty: 16) 
7/16-in Wrench

Process:

NOTE: Use adequate personnel for this operation.

• Remove the bottom drawer by following the drawer 
  removal instructions.
• Lay the cabinet down on its back. Use packaging 
  material to protect the paint finish.
• Mount both swivel casters on the same side of the cart 
  as the side handle.
• Attach each caster using (4) 1/4-20 x 5/8 screws and 
  (4) 1/4” nuts per caster.
• Wrench tighten all screws.
• Return the cart to its upright position.

0.579462s