Craftsman 316.292601 Operator's Manual | Page 6
6
ASSEMBLY INSTRUCTIONS
ASSEMBLING THE HANDLEBARS
Before you can operate the unit, you must install the
handlebars.
1.
When you unpack the unit, hold the handle bar in the
position shown in Figure 1 and slide it onto the lower bars.
2.
Align the holes in the handlebar with the holes in the lower
bars and insert the bolts through those holes.
3.
Hold the handle in place while screwing the knobs onto
the bolts (Fig. 2).
4.
Tighten the knobs to secure the handlebars in place.
NOTE:
Do not over-tighten the knobs.
5.
Check to make sure the bail is assembled into the switch
assembly (Fig. 1, Inset A).
NOTE:
Take care not to pinch the switch cable when
positioning the handlebars.
6.
Clip the switch cable to the cable restraint on the lower
bar as shown in Figure 1, Inset B.
Related Manuals for Craftsman 316.292601
-
Bolens Cultivator BL410 Operator's Manual
56 pages
-
Bolens Cultivator 316.292711 Operator's Manual
48 pages
-
Bolens Cultivator Craftsman 316.29262 Operator's Manual
40 pages
-
McCulloch Cultivator 433691 Operator's Manual
22 pages
-
McCulloch Cultivator 96083000300 Operator's Manual
22 pages
-
McCulloch Cultivator MC550 Operator's Manual
22 pages
-
Simplicity Cultivator 209 Operator's Manual
2 pages
-
Craftsman Cultivator C944.511580 Operator's Manual
9 pages
-
Craftsman Cultivator 51158 Operator's Manual
9 pages
-
Craftsman Cultivator 944.51158 Operator's Manual
9 pages
-
Craftsman Cultivator 316.292711 Operator's Manual
48 pages
-
Craftsman Cultivator 316.29271 Operator's Manual
48 pages
-
Craftsman Cultivator 316.2927 Operator's Manual
36 pages
-
Craftsman Cultivator 316.2926 Operator's Manual
32 pages
-
Craftsman Cultivator 316.292561 Operator's Manual
40 pages
-
Craftsman Cultivator 316.29256 Operator's Manual
40 pages