Craftsman 26 in. Wide 3-Drawer Standard Duty Ball-Bearing Top Chest - Red Use & Care Manual

Craftsman Chests Use & Care Manual - 26 in. Wide 3-Drawer Standard Duty Ball-Bearing Top Chest - Red.
Download
Page  of 5
4.5, 2256 votes
background image

Ball bearing

* Product you purchased may vary from 

picture shown

OPERATOR’S MANUAL

F1976

Sears Brands Management Corporation, Hoffman Estates, IL 60179  USA

safety

DaNGeR 

is used to indicate a hazardous situation which, 

if not avoided, will result in serious injury or death.

WaRNING 

indicates a hazardous situation which, if not 

avoided, could result in serious injury or death.

CautIoN is used to indicate a hazardous situation which, if not 

avoided, may result in minor injury, moderate injury, or property 

damage.
CautIoN:  Read and follow all Safety Rules and Operating 

Instructions before first use of this product.

•  Periodically the drawer fronts, drawer trim, and other surfaces 

should be cleaned with a mild detergent and water.

•  Auto wax will preserve the unit’s luster finish. Apply the wax as to a 

car. The wax will also help protect the unit against scratches.

•  Grease and oil can be removed with most standard cleaning fluids. 

For safety, use a nonflammable cleaning fluid.

•  If drawer liners are supplied, it is recommended they are used 

to protect the finish inside the drawers and to make the drawers 

easier to clean. The drawer liners may be cleaned with soap and 

water.

•  For casters, use high quality bearing grease, (yearly). 

•  Lubricate the slides with grease or equivalent,(twice yearly.) 

maINteNaNCe

•  Lubricate lock with graphite, (yearly).

CapaCItIes

•  The maximum weight for each drawer should be no more than 

30 lbs.

•  The maximum product weight, including contents, should be 

no more than 300 lbs. for each model combination with 3 x 1 

inch casters. The maximum product weight, including contents, 

should be no more than 500 lbs. for each model combination 

with 4 x 2 inch casters.

Call 1-800-366-7278 foR seRvICe paRts. Refer to Service 

Parts Drawing for full listing of Service Parts.

loCatING moDel # INfoRmatIoN

Model numbers and other information required for service parts is 

located on a label on the interior right side of the top most drawer.

DaNGeR

•  

Do Not stand on this product. You may fall, which may cause 

personal injury.

•  

Do Not step in drawers. You may fall, which may cause personal 

injury.

•  

use tHe BRaKes when not moving this product. This will pre-

vent the product from rolling, which may cause personal injury or 

product damage.

•  

appRopRIately seCuRe this product before moving with a 

forklift.

•  

Do Not tow with power equipment. The product could tip, which 

may cause personal injury or prduct damage.

WaRNING

•  

WeaR safety Glasses when removing or repositioning the 

slides. The tool could slip, which may cause personal injury.

•  

Do Not mount this product on a truck bed or any other moving 

object. This may cause personal injury or product damage.

•  

Do Not alter this product in any manner. For example, do not 

weld external lockbars or attach electrical equipment. This may 

cause personal injury or product damage.

•  

uNIt must Be located on a level surface. The product may be-

come unstable and tip if stored or moved on an un-level surface, 

which may cause personal injury or product damage.

•  

loCK the drawers before moving this product. The drawers could 

come open and make the product unstable and tip, which may 

cause personal injury or product damage.

•  

Do Not pull this product when moving it. Push the product to 

prevent personal injury.

CautIoN

•  

Be CaReful when opening more than one drawer. The product 

may become unstable and tip, which may cause personal injury or 

product damage.

seRvICe paRts

STANDARD DUTY TOOL CHESTS

Also See for Craftsman 26 in. Wide 3-Drawer Standard Duty Ball-Bearing Top Chest - Red

Related Manuals for Craftsman 26 in. Wide 3-Drawer Standard Duty Ball-Bearing Top Chest - Red

0.592822s