Craftsman 26 in. Wide 3-Drawer Standard Duty Ball-Bearing Rolling Cabinet - Black Use & Care Manual | Page 4

Craftsman Cabinets Use & Care Manual - 26 in. Wide 3-Drawer Standard Duty Ball-Bearing Rolling Cabinet - Black.
Download
Page  of 8
4.2, 2287 votes
background image

removiNG aND iNstaLLiNG sLiDes

•  To remove the slide from the unit, first remove the 

drawer.

•  After removing the drawers drill out the rivets, use a 5/32-

in drill bit. The rivets will need to be replaced.

•  To reinstall the slide, place the slide in the appropriate 

position in the unit and pull toward the front of the unit. 

Replace rivets to secure slide to the unit. 

•  For smooth operation, make sure the drawers are 

matched with their original slides.

•  Insert the lockbar (which stores in the top tray), tabbed 

end up, into the slot in the top tray and down into the slot 

in the base. Close the cover and lock with the key.

to LocK cHest

•  The lockbar for the roll-away is stored in a slot in the top 

front corner of the unit.

•  Insert the straight end of the lockbar into the slot in the 

base.

•  Move the lockbar toward the unit until the bent end fits 

into the slot near the lock. Lock with the key.

to LocK roLL-aWay

•  If your unit is equipped with a storage compartment with 

a panel at the bottom, pull panel out, lift up and push 

panel back into unit to gain access to compartment.

paNeL

removiNG aND iNstaLLiNG sLiDes from uNit

• First remove the drawer. (See section A)

to remove the slide:

• Push slide to the closed position.

•  Insert flat tip screw driver between slide and unit, behind 

rear rectangular cutout.(See illustration.)

• Rotate screw driver ¼ turn to force slide away from unit.

• Push on front of slide pushing it towards back of the unit. 

to attach the slide: 

•  Extend slide and locate lances within respective 

cutout in carrier.

• Pull slide forward until slide locks back into place.

•  Reinstall drawer following drawer installation proce-

dure.(See section B)

operatioN

4

Drill out rivet

Related Manuals for Craftsman 26 in. Wide 3-Drawer Standard Duty Ball-Bearing Rolling Cabinet - Black

0.573986s