Craftsman 26 in. 4-Drawer Heavy-Duty Ball Bearing Rolling Cabinet - Red/Black Owner's Manual | Page 3

Craftsman Cabinets Owner's Manual - 26 in. 4-Drawer Heavy-Duty Ball Bearing Rolling Cabinet - Red/Black.
Download
Page  of 8
4.7, 1754 votes
background image

Release

•   Empty the drawer.
•   Fully extend the drawer.

REMOVING DRAWERS

LABELS (IF APPLICABLE)

Process:
•  Apply a light film of glass cleaner to the surface where 

the label is to be applied.

•  Peel the label from the backing and place the label in 

position.

•  Check alignment of the label and adjust accordingly.
•  Hold the label in position and squeegee off excess liquid 

with a towel, working from the center toward each end of 
the label.

•  Suggested label location is shown.

Lever Style - Lift or lower (depending on the slide) the 
release lever on both sides, (this allows the slides to ride 
over the stops). Pull out to remove.

3

OPERATION

slide carrier

slide

Spring Retainer

Ball bearing slide - Pull slides and slide carrier out to fully 
extended position (see illustration.) Hold the slide on the 
cabinet while aligning it with the slide on drawer. Slightly 
insert one side and repeat for the other side. Slowly push 
drawer to its fully closed position to engage slide. Open 
drawer and reclose to ensure proper operation.

INSTALLING DRAWERS

REMOVING AND INSTALLING SLIDES

•   To remove the slide from the unit, first remove the    
   drawer.
•   After removing the drawer check to see if the unit has 

rivets located on the front of the slide. To drill out rivets, 
use a 5/32-in drill bit. The rivets will need to be replaced 
with 5/32-in rivets.

•   To reinstall the slide in the appropriate position in the 

unit, align front and back lances with mounting holes in 
the side of the unit. Pull towards the front of the unit and 
downwards until rivet holes in slide line up with holes in 
the unit. The rivets will need to be replaced with 5/32-in 
rivets.

•   For smooth operation, make sure the drawers are    
   matched with their original slides.

Related Manuals for Craftsman 26 in. 4-Drawer Heavy-Duty Ball Bearing Rolling Cabinet - Red/Black

0.561243s