Craftsman 24 in. Digital LaserTrac Level Owner's Manual | Page 9

Craftsman Laser Tools Owner's Manual - 24 in. Digital LaserTrac Level.
Download
Page  of 10
4.2, 1193 votes
background image

6

24-inch LEVEL

DESCRIPTION

KNOW YOUR LEVEL  

Fig. 1

Battery 
Compartment 

Laser On 
Demand Button

Encased 
Bubble Vial

LCD Display Screen

Fig. 1a

Endcaps 

Laser 
Light Aperture   

1/4-in. 
Threaded 
Tripod Hole   

Working Base

Soft Grip 
Handles        

Fig. 1a

Encased 
Bubble Vial

Integrated 24-in. ruler 

15

CURRENT READING HOLD BUTTON AND MEMORY RECALL
To hold the information of the current reading, press the Hold button. The level can 

hold nine different readings in its memory. To read out the measurements, press the 

Memory Recall button. The last nine measurements can be read out, beginning with 

the most recently saved.To make a new measurement, press the hold button to

return to measuring mode.

USING CONVERSION BUTTON TO CHANGE DISPLAY UNITS
The conversion button changes the measurement units from degrees (o) to pitch 

(in/ft) to slope percent (%). Pitch readings are in 1/8-in. per foot increments. Plus 

and minus signs indicate when the pitch is slightly more (+) or less (-) than true 

level shown on the display. The conversion button can be used even when the 

display is in the HOLD mode. This feature is a convenient way to convert angles 

from one unit to another, For example, a 5-in/ft. roof pitch measurement can 

be converted to 22.6o for setting up cuts on a chop saw.  

ABSOLUTE ANGLE AND RELATIVE ANGLE MEASUREMENTS

ABSOLUTE ANGLE MEASUREMENT
 1.  Lay the digital laser level on a working surface with the base flat against the surface.  
 2.  When level power is turned on, the display indicates the absolute angle between 

      “level” and working surface. The zero line indicates the level position, and the arrow 

      indicates the direction of the working surface either above or below level.   
 3.  To activate the beeper, push the beeper button. The beeper will sound when the 

      level is at 0o (level), 45o, and 90o (plumb). To deactivate beeper, push button 

      a second time.
 4.  To save the measured angle in memory, press the hold button. This level can 

      remember the last nine measurements.  To display the data in memory, press the 

      memory recall button to recall recorded angles. The level will read out the data 

      starting with the most recent measurements and going backwards to the earliest 

      in its memory. 
 5.  To take a new measurement, press the hold button to return to measurement mode.

RELATIVE ANGLE MEASUREMENT 
 1.  Lay the digital laser level on the First working surface. 
 2.  Turn on the level. The LCD screen indicates the absolute angle between true level 

      and the working surface. 
 3.  Press the ZERO button to enter relative angle measurement mode.

 

The current 

      angle will be considered to be 0.0o and the display will read 0.0o.
 4.  Place the digital level on the Second working surface and the relative angle between

      the First working surface and the Second working surface will be displayed. The 

      zero line indicates the First working surface position, and the arrow indicates 

      the direction of the Second working surface either above or below the First 

      working surface level.
 5.  At this point you can change the display units for the measured angle from degrees 

     (o) to pitch (inch/foot) or slope (%) by pressing the conversion button.

OPERATION cont.

Also See for Craftsman 24 in. Digital LaserTrac Level

0.616789s