Craftsman 24 in. Digital LaserTrac Level Owner's Manual | Page 5

Craftsman Laser Tools Owner's Manual - 24 in. Digital LaserTrac Level.
Download
Page  of 10
4.2, 1193 votes
background image

16

24-inch LEVEL

MAINTENANCE

TROUBLESHOOTING

This digital laser level has been designed to be a low-maintenance tool. However, 

in order to maintain its performance, follow these steps.
 1.  

HANDLE the tool with care. Treat it as a precision optical device, such as a camera 

      or binoculars.
 2.  

AVOID exposing the tool to shock, continuous vibration or extreme hot 

      or cold temperatures.
 3.  

STORE  the tool indoors and in a safe place.

 4.  The Level is designed to be weather resistant and construction site tough. If the level 

      is splashed with mortar or other construction site residue, simply wipe clean with a 

      damp cloth. 

DO NOT immerse the level in water.

 5.  Aluminum surfaces can be cleaned with a non-abrasive powder. 
 6.  Check the batteries regularly to avoid corrosion. 

REMOVE the batteries from the tool 

      if it is not going to be used for an extended period.
 7.  

DO NOT try to take the level apart. 

PROBLEM                CAUSE  

                        SOLUTION

Laser point 

projection 

is weak.

Laser point 

is not projected.

The LCD screen 

will not turn on.

Batteries are low in power.

Laser On Demand Switch 

is not On

Batteries are installed 

incorrectly.

Battery power is low.

Laser diode is damaged

Batteries are installed 

incorrectly.

Battery voltage is low.

The LCD screen is 

damaged.

Replace with new 

batteries.

Check to make sure 

the switch is in the 

“On” position.

Reinstall batteries with      

correct polarity.

Replace with 

new batteries.

Take tool to Sears 

Service Center

Reinstall batteries 

with correct polarity.

Replace with new 

batteries.

Take tool to Sears 

Service Center

5

SAFETY INSTRUCTIONS cont.

  5.   

DO NOT operate the Laser Trac™ level around children or allow children to 

        operate the tool. Serious eye injury could result.
  6.   

ALWAYS turn the Laser Trac™ level off when not in use. Leaving the tool on 

        increases the risk of someone inadvertently staring into the laser beam.
  7.   

DO NOT operate the Laser Trac Level in combustible areas such as in the 

        presence of flammable liquids, gasses or dust. 
  8.   

DO NOT use on surfaces such as sheet steel that have a shiny, reflective 

        surface. The shiny surface could reflect the beam back at the operator. Be aware 

        that laser light reflected off a mirror or any other reflective surfaces can also 

        be dangerous.
  9.   

DO NOT attempt to modify the performance of this laser device in any way. 

        This may result in a dangerous exposure to laser radiation.
10.   

ALWAYS use only the accessories that are recommended by Sears for use 

        with the Laser Trac™ Level with this product. Use of accessories that have been 

        designed for use with other laser tools could result in serious injury.
11.   

DO NOT use the Laser Trac Level for any purpose other than those outlined 

        in this manual. This could result in serious injury.
12.   For further information regarding lasers, refer to ANSI-Z136.1 the 

STANDARD 

        FOR THE SAFE USE OF LASERS, available from the Laser Institute of America 

        (407) 380-1553.
13.   

ALWAYS USE two “AAA” size batteries. Use of any other batteries may create 

        a risk of fire. 
14.   

INSERT the batteries correctly. Match the polarities, positive (+) to positive and 

        negative (-) to negative, as marked inside battery compartment.
15.   

DO NOT short battery terminals.

16.   

DO NOT MIX old and new batteries. If batteries are weak, replace both of them 

        with two new batteries. These new batteries should match each other in brand 

        and type.
17.   

Remove dead batteries immediately and dispose of them according to your 

        local ordinance. 
18.   

NEVER dispose of batteries in fire. 

19.   

Keep batteries out of reach of children. They are not playthings.

20.   

Remove batteries and store separately if level will not be used for several days.

21.   Do not attempt to repair or disassemble the laser level. If unqualified persons 
        attempt to repair this laser product, serious injury may result. Any repair 
        required on this laser product should be performed by authorized service 
        center personnel.

SAFETY PRECAUTIONS FOR LASERS cont.

Also See for Craftsman 24 in. Digital LaserTrac Level

0.687187s