Craftsman 10 Cu Ft Poly Dump Cart Owner's Manual | Page 4

Craftsman Tractor Attachments Owner's Manual - 10 Cu Ft Poly Dump Cart.
Download
Page  of 12
4.6, 1012 votes
background image

4

aSSEMBly

tOOlS rEQuIrED FOr aSSEMBly

(1) Screwdriver
(1) Pliers
(2) 

7/16” Wrenches

(2) 

1/2” Wrench

(2) 

9/16” Wrenches

FIGurE 2

FIGurE 3

StEP 1:  (SEE FIGurE 1)

Verify that all parts and all fasteners on page 2 are 
included in the carton and parts bag. Refer to page 2 
to identify fasteners used in the following instructions. 

Place the latch lock lever through the slot in the 
tongue. Assemble the hex bolt (D) through the 
tongue, the lever, and two hex nuts (H) placed on 
each side of the lever. Assemble the hex nut (G) onto 
the end of the hex bolt (D) and 

tighten so that the 

hex bolt (D) can still rotate freely. 

tighten the two 

hex nuts (H) against each side of the lever so that the 
lever is centered in the slot.

StEP 2:  (SEE FIGurE 2)

Hook the 

short end of the spring (M) into the hole in 

the latch lock lever. Use the spring puller tool (O) to 
hook the 

long end of the spring into the square hole 

in the tongue. The spring puller tool can be stored 
when finished.

StEP 3:  (SEE FIGurE 3)

Assemble the hitch bracket to the tongue using two 
hex bolts (C) and hex nuts (I). 

tighten. 

Assemble the hitch pin (L) through the tongue and 
hitch bracket and secure it with the hair cotter pin (J).

FIGurE 1

(H)

(G)

(D)

(M)

(O)

(C)

(I)

(J)

(L)

Also See for Craftsman 10 Cu Ft Poly Dump Cart

Related Manuals for Craftsman 10 Cu Ft Poly Dump Cart

0.581914s