Craftsman 10 Compound Miter Saw (21236) Owner's Manual | Page 8

Craftsman Miter Saws Owner's Manual - 10 Compound Miter Saw (21236).
Download
Page  of 29
4.9, 1516 votes
background image

8

9

8

ACCESSORIES AND ATTACHMENTS

TOOLS NEEDED FOR ASSEMBLY

RECOMMENDED ACCESSORIES

●   Use only accessories recommended for 

this miter saw. Follow instructions that 

accompany accessories. Use of improper 

accessories may cause hazards.

   The use of any cutting tool except 10 in. 

saw blades which meet the requirements 

under recommended accessories is 

prohibited. Do not use accessories such 

as shaper cutters or dado sets. Ferrous 

metal cutting and the use of abrasive 

wheels is prohibited.

   Do not attempt to modify this tool or 

create accessories not recommended for 

use with this tool. Any such alteration or 

modification is misuse and could result in 

a hazardous condition leading to possible 

serious injury.

ACCESSORIES

Visit your Sears Hardware Department or see the 
Sears Power and Hand Tool Catalog to purchase 
recommended accessories for this power tool.

●   To avoid the risk of personal injury, do not 

modify this power tool or use accessories 

not recommended by Sears.

●   Read warnings and conditions on your 

CARBIDE TIPPED SAW BLADE. Do not 

operate the saw without the proper saw 

blade guard in place. Carbide is a very 

hard but brittle material. Care should be 

taken while mounting, using, and storing 

carbide tipped blades to prevent accidental 

damage. Slight shocks, such as striking 

the tip while handling, can seriously 

damage the blade. Foreign objects in the 

workpiece, such as wire or nails, can also 

cause tips to crack or break off. Before 

using, always visually examine the blade 

and tips for bent blade, cracks, breakage, 

missing or loose tips, or other damage. Do 

not use if damage is suspected. Failure to 

heed safety instructions and warnings can 

result in serious bodily injury.

COMBINATION SQUARE MUST BE TRUE

Should not gap or overlap when square is flipped 

over (see dotted figure).

WARNING

!

WARNING

!

Draw light line on 

board along this 

edge. 

Straight edge or 

a 3/4 in. board, 

this edge must be 

perfectly straight.  

Gap from untrue square when 

flipped over.

SUPPLIED

NOT SUPPLIED

Adjustable Wrench

Combination Square

Philips Screwdriver

Slotted Screwdriver

Blade Wrench

      Hex Key

0.564934s