Cosco Apt 40RF Installation Manual | Page 17

Cosco Car Seat Installation Manual - Apt 40RF.
Download
Page  of 30
4.8, 1576 votes
background image

31

32

E. Installing Rear-Facing

LATCH Belt

Lap Belt

Lap/Shoulder Belt

5-40 lbs (2.3-18 kg) and 19-40 in. (48-101.6 cm)
Rear-Facing using 5-point harness

 E-1 Preparing to Install Rear-Facing

Never place a child rear-facing in a 
seating position with an active frontal 
airbag. This can result in serious injury 
or death.

This child restraint must always face the rear of 
the vehicle and be in the fully reclined position 
when the child is less than one year old.

 E-2 Preparing to Install LATCH
         Rear-Facing

Unhook LATCH from 
Side of Shell 

Remove the LATCH from 
the forward-facing belt 
path.

1.

 

Routing LATCH Belt 

Insert the LATCH hook 
with adjuster through the 
rear-facing belt path. 

2.

 

Pull Connector Across 
to Opposite Side 

Reach under pad and 
pull the LATCH connector 
across the plastic shell.  
LATCH belt MUST be 
under pad and in front of 
buckle strap.

NOTE:  You MUST use the 
1st or 2nd buckle strap 
slots when rear-facing. 

3.

 

Finished LATCH 
Routing 

Make sure the LATCH belt 
is not twisted.

4.

 

Adjuster

2

1

Meijer.com

 

0.578912s