Coleman 2000002596 User's Manual

Coleman Tent User's Manual - 2000002596.
Download
Page  of 2
4.9, 2141 votes
background image

2.  Assemble six, steel, shock-corded, Leg Poles.  
 (Fig. 

1)

3.  Push down on steel button on tapered end  
 

and insert into end with four holes.

 

NOTE: Make sure steel button locks into  

 

third hole on pole as shown. (Fig. 2)

4.  Assemble three, steel, shock-corded,  curved  
 

Ridge Poles. (Fig. 1)

5.  Stretch four corners of tent until taut; then  
 

drive plastic stake web strap of each to  

 

secure. (Fig. 3)

ROCKWALLTM   12 TENT

 MODEL 2000002596

STITCH LINE

To Set Up Tent 
1.  Unfold tent and spread out on a clean, level surface with the door
 

facing the desired direction.

8.  Rotate all six Leg Poles upright and insert pin on each web  

 

 

loop at the side locations as shown. (Fig. 7 & 7A)

(continued on other side)

Pole Descriptions
  

 

Pole 

Pole  Pole 

 

Description 

 Qty. 

Dia. 

Repair Kit 

Replacement Kit

 Long Leg Pole, steel 
  (w/ red marking) 

19mm 

N/A 

5010000678

 Short Leg Pole, steel 

19mm 

N/A 

5010000680

 Curved Ridge Pole, steel  
  (w/ red marking) 

19mm 

N/A 

5010000677 

 Curved Ridge Pole, steel 

19mm 

N/A 

5010000679

 Vertical Door Pole, black,
  short w/rubber tips 

6.3mm  5010000543 

5010000545

  Door Pole, black,
  long w/rubber tips 

6.3mm  5010000543 

5010000545

Fig. 3

9.  Stretch tent to finished size:
 

•  Push in button on Leg Pole while    

 

  twisting lower Leg Pole section 

 

  

counterclockwise 

(Fig. 

8);

 

•  Pull up on top Leg Pole section until  

 

  tent is taut;

 

•  Twist the lower Leg Pole clockwise  

 

  until the button locks into the center  

 

  or lowest hole;

 

•  Repeat on remaining Leg Poles.

10.  Locate Frame Clips on front and back of  
 

tent; then attach to Leg Poles as shown.

 (Fig. 

9)

11.  Insert plastic stakes through  

 

web straps located at bottom  
 of each Leg Poles; then drive  
 in to secure. (Fig. 10)

Fig. 8

Button

Center Hole

Lower Hole

Lower 
Leg Pole 
Section

Upper 
Leg Pole 
Section

Button in 

third hole

Fig. 2

Curved Ridge Poles (3)

Leg Poles, 

short (4)

Leg Poles, 

long (2)

Fig. 1

6.  Insert Ridge Pole (with red marking) into center sleeve on top of tent  
 

with the red trim (Fig. 4 & 6). Insert the remaining curved Ridge Poles  

 

into the other two sleeves on top of tent.

7.  Insert curved end of Leg Pole (with red marking) into the  ends of the  
 

Ridge Pole (with red dot). Insert curved end of  remaining short Leg  

 

Poles into the ends of the remaining Ridge Poles. (Fig. 5 & 6)

Curved

Ridge Pole 

with Red 

Marking

Fig. 4

Sleeve 

with Red 

Trim

Ridge Pole with 

Red Marking

Fig. 5

Sleeve 

with Red 

Trim

Curved End of 

Long Leg Pole

Door

Curved Ridge Pole 

in sleeve

Fig. 6

 Long Leg Pole

Curved Ridge Pole in 

sleeve with Red Marking

Short Leg Pole

Front of Tent

Short Leg Pole

Curved Ridge Pole 

in sleeve

Fig. 10

Fig. 9

7A

Pin

Fig. 7

Hinged, Rigid Door
1.
  Assemble Vertical Door Pole (shorter black pole with plastic tips);    
 

then insert through zippered vertical pole sleeve on hinged side of    

 

door. (Fig. 11)

2.  Insert end of Vertical Door Pole into bottom hinge plate, apply
 

pressure to form a slight bow, then insert other tip of pole into top   

 

hinge. Zip up vertical pole sleeve. (Fig. 12 & 13)

3.  Assemble Door Pole (longer black pole with plastic cap tips); then    
 

insert into zippered pole sleeve at top of door. (Fig. 14)

4.  Insert end of Door Pole into top hinge plate, apply pressure to form  
 

a bow, then insert other tip of pole into the bottom hinge. (Fig. 15)

5.  Zip up pole sleeve to enclose Door Pole. (Fig. 16)

Fig. 11

Fig. 12

Fig. 13

Vertical Pole 

Sleeve

Door Hinge

Fig. 14

Fig. 15

Fig. 16

Pole 

Sleeve

Top 

Door 

Hinge

Before you begin
Read all instructions before set up.
• Select a level site clear of rocks, branches, and other hard or sharp  

 

  objects, to install your tent.
      WARNING: Keep clear of overhead power lines

.

• Do not set up your tent under trees because of potential lightning strikes  

or falling tree limbs in inclement weather.

•  Secure with all stakes and guylines provided to prevent property damage  

or personal injury.

•  For best results in windy conditions, position narrow end of tent into
 the 

wind.

•  Enlist the help of at least one other person to assist you when it is time  
  to assemble the tent.

Self-Rolling Window Spring Descriptions 

 

  Color Code Description 

 Qty. 

Length 

Replacement Part No.

 Green 

610mm  5010000627

 Orange 

10 

670mm  5010000628

CAUTION: “Springs” may have sharp edges. Handle with care to avoid 
injury. Keep out of reach of children.

0.604369s