Coleman 2000001589 User's Manual

Coleman Tent User's Manual - 2000001589.
Download
Page  of 2
4.6, 2141 votes
background image

STITCH LINE

EVANSTONTM   6 TENT MODEL 2000001589

Pole Descriptions

Pole

Pole

Pole

Description

Qty.

Dia.

Repair Kit Replacement Kit

Main Pole, black 

2

11mm

501000539

501000549

Main Pole, grey

1

11mm

501000539

501000549

Rainfly Pole, black, long

1

11mm

501000539

501000549

Awning Pole, black, short 1

6.9mm 501000542

501000552

Before you begin
Read all instructions before set up.
• Select a level site clear of rocks, branches, and other hard or sharp 

objects, to install your tent.

WARNING: Keep clear of overhead power lines

.

•  Do not set up your tent under trees because of potential lightning strikes

or falling tree limbs in inclement weather.

• Secure with all stakes and guylines provided to prevent property damage

or personal injury.

•  For best results in windy conditions, position narrow end of tent into

the wind.

•  Enlist the help of at least one other person to assist you when it is time 

to assemble the tent.

To Set Up Tent
1. 
Unfold tent and spread out on a clean, level surface with the door 

facing the desired direction. (Fig. 1)

2.

Assemble all poles by interlocking the shock-corded, sections 
together.

3.

Insert black Main Poles through the black trimmed sleeves on top 
of tent forming an X”.

4. Insert grey Main Pole through grey trimmed sleeve, in front of tent. 

Make sure grey Main Poles overlap the black Main Poles. (Fig. 1) 

Fig. 1

Door

Grey, Shock-corded

Main Pole

Black, Shock-corded Main Poles

Sleeves with Black Trim

Sleeve with

Grey Trim

5. Insert end of each black Main Pole into pins located in the corners 

of the tent. (Fig. 2 & 2A)

6. Go to opposite end of each black Main Pole and gradually apply 

pressure to each forming arches. Insert the pin into each pole end 
at the corners of tent. (Fig. 2 & 2A)

7. Insert end of the grey Main Pole into pin located on the sides of the 

tent. (Fig. 2 & 2B)

8. Go to opposite end of the grey Main Pole and gradually apply pres-

sure to form an arch. Insert the pin into pole end at the  side of tent.
(Fig. 2 & 2B)

Fig. 2

Door

2A

2B

Front of Tent

9. Attach frame clips along edges of tent 

to the black & grey Main Poles.
(Fig. 3)

Fig. 3

10. Stretch tent until taut, then secure metal loops

located on both sides and four corners of tent
with stakes. (Fig. 4)

Fig. 4

To Attach Rainfly
1. 
Drape Rainfly over tent with dark blue vestibule flaps located at the 

front of the tent. (Fig 5).
NOTE: Hook and loop fasteners, located on seams of underside of 
Rainfly, should be centered over black & grey Main Poles.

2. Insert  the long, black, Rainfly Pole with through sleeve in underside

of Rainfly above front door of tent. (Fig. 5)

Fig. 5

Sleeve with Grey Trim

Black, Shock-corded

Rainfly Pole

Rainfly

Front of Tent

Door

Fig. 6

Awning Pole

Rainfly Sleeve

Back of Tent

3. Insert short, black, thin Awning Pole through sleeve in underside of 

Rainfly above window at back of tent. (Fig. 6)

4.

Insert metal tip into grommet on tent seam at back of tent (Fig. 7). 
Go to opposite end of Awning Pole and gradually apply pressure to 
pole forming an arch; then insert metal tip into grommet. 

Vestibule Flaps

Awning

Pole

Grommet

Front of Tent

Fig. 7

(continued on other side)

5. Insert end of each black Rainfly Pole into 

pin on either side of front door. (Fig. 8)

6. Go to opposite end of Rainfly Pole and 

gradually apply pressure to form an arch. 
Insert the pin into pole end at other side of
the door. (Fig. 8)

7. Locate all hook & loop fasteners on under

side of Rainfly and wrap around all Main 
Poles, Awning & Rainfly Pole to secure. 
(Fig. 9)
NOTE: Make sure longer hook & loop
fastener on Rainfly is secured around grey 
and black Main Poles where they cross. 
(Fig. 10)

Fig. 8

Fig. 9

Fig. 10

0.511743s