Coleman 16'x7' User's Manual

Coleman Camping Equipment User's Manual - 16'x7'.
Download
Page  of 2
4.8, 2151 votes
background image

Connect Frame to Tent
– Locate the pin & ring systems on 

either side of the front door and the
corresponding pin & rings on the back
side of tent.

– Insert one end of black frame pole onto

pin & ring system on tent stake loop on
either side of front door. (illus. 3)

– Go to opposite end of pole diagonally

from starting point and gradually apply
pressure to the pole forming an arch
until you are able to insert the pin into
pole end.

– Repeat for second pole.
– Attach tent frame clips to poles.

Montana Big Sky™ 16’x7’ 

1 Layout & Positioning 

of Tent, Pole Assembly
– Layout and position tent with door

facing desired direction. (illus. 1)

– Unzip door.
– Stake down tent corners, using the 

tent stake loops. Keep the floor taut.
(illus. 2)

– Assemble all poles by interlocking

shock-corded poles.

– Insert the black poles into center pole

sleeves marked with black binding.
The poles should cross forming an 
“X” in the middle of tent. (illus. 1)

2

When You Are Ready 
To Set Up Your Tent
– Select a level campsite clear of

rocks, branches and other hard or
sharp objects.

– Do not set up your tent under trees.
– For best results in windy conditions,

position the end of tent into the wind.

(2) Side Tent 

Poles (Grey)

(2) Main Tent Poles

(Black)

POLE ASSEMBLY PARTS

Front door

Instructions apply to Part Number 2000000141

illus. 1

illus. 2 Tent

stake through

stake loop

illus. 4

Center section upright

Part No. 9278B3681

Part No. 9278B3691

illus. 3
pin & ring system located
on the front & rear of tent

Black poles

Black poles

Rainfly Part No.

9278B3661

(2) Rainfly Poles

Part No. 9278B3651

Related Manuals for Coleman 16'x7'

0.569577s