Chicco KEYFIT 30 User's Manual | Page 17

Chicco Car Seat User's Manual - KEYFIT 30.
Download
Page  of 21
4.7, 1876 votes
background image

32

33

1

.Position Base.in.forward.facing.

vehicle.seat.with.Recline.Foot.
against.seat.back.

2

.Adjust Base Angle.by.pushing.

Recline.But ons.while.lifting.Base. .
Angle.is.correct.when.Bubble.is.
between.arrows.
Vehicle must be on a level surface for 

  the Bubble to indicate correctly.

3

.Route Vehicle Belt.through.

openings.in.Base.and.buckle.
the.vehicle.belt. (Do.not.put.the.
shoulder.belt.in.locked.mode.)

4

.Tighten Vehicle Belt.while.

pushing.Base.firmly.into.vehicle.
seat.
.Secure Vehicle Shoulder Belt.
firmly.into.Shoulder.Belt.Lockof ,.
while.keeping.tension.on.Belt. Only.
use.the.lockof .on.the.opposite.
side.of.the.buckle.

.

1

INSTALLATION USING VEHICLE BELT

LATCH or Vehicle Belt?  This Child Restraint can

be safely installed using Vehicle Belts or LATCH.

Use the method that results in the MOST

SECURE installation in your vehicle.

2

3

4

6

.CHECK Instal ation:

a

.Belts.MUST.be.TIGHT.

b

.Base.MUST.be.STABLE.

c

.Bubble.MUST.be

. . between.arrows.
d

.Belts.&.Buckles.MUST.NOT.

. . INTERFERE.with.at achment.
. . of.Carrier.to.Base.

7

.Attach Carrier To Base.after.

properly.securing.child.in.Carrier.

.

.

Uninstal ing Base:
Remove.Carrier.from.Base,.
unbuckle.Vehicle.Belt,.and.remove.
Base.from.vehicle.

7

 NEVER travel with Child Restraint unsecured in vehicle.  

Passengers may be injured during a sudden stop or crash.

INSTALLATION USING VEHICLE BELT

5

If using Vehicle Lap Belt only 

(no Shoulder Belt), make sure 

that Lap Belt is LOCKED, and 

that free end of Lap Belt is 

neatly stored so it DOES NOT 

INTERFERE with at achment 

of Carrier to Base. 

6

 ALWAYS lift up on Carrier 

to verify it is properly attached 

to the Base.

 

Also See for Chicco KEYFIT 30

0.538998s