Champion Power Equipment Model 10020 Owner's Manual | Page 9

Champion Power Equipment Winches Owner's Manual - Model 10020.
Download
Page  of 17
4.4, 1914 votes
background image

REV 10020-20131126

  

6

10020 ENGLISH

asseMbly

Mounting the Winch
This CPE 2,000 lb winch is designed with a bolt 
pattern that is standard in this class of winch . 
Many winch mounting kits are available that 
utilize this bolt pattern for the most popular 
trucks, SUV’s and ATV’s . If you cannot find a kit 
locally, contact CPE and we will provide you with 
the name of a dealer .

Mounting bolts must be SAE grade 5 or better 
and torque to 34 ft . lbs .

CauTIoN

3 .  Disengage the clutch by rotating the clutch 

knob to the “Out” position . Release the wire 
rope and pull through the roller fairlead .

4 .  Attach the clevis hook and hand strap . 
5 .  Connect the battery leads . FOR WINCH TO 

FUNCTION PROPERLY: Connect the red (+) 
lead of the remote to the red (+) terminal of 
the vehicle’s 12 volt battery . Connect the 
black (–) lead of the remote to the black (–) 
terminal of the vehicle’s 12 volt battery .

6 .  Attach the remote lead to the winch and test 

for proper operation .

7 .  Check for proper drum rotation . Pull and 

turn the clutch knob to the “out” position 
(Free spooling) . Pull out some cable from the 
drum, and then turn the clutch knob to the 
“In” position to engage the gears . Press the 
cable out button on the switch . If the drum 
is turning and releasing more cable then 
your connections are accurate . If the drum 
is turning and collecting more cable then 
reverse the leads on the motor . Repeat and 
check rotation .

2 .  To attach the winch and the mounting 

channel to a flat surface; insert M8x35 bolt 
through the winch base plate, then through 
the mounting channel, then through a flat 
mounting surface . Secure the winch and 
mounting channel with the M8 flat washer, M8 
lock washer, and M8 nut provided .

Mounting the Winch Cont’d.

1 .  Insert M8x20 bolts through the mounting 

channel hole and attach the roller fairlead to 
the mounting channel with the M8 flat washer, 
M8 lock washer, and M8 nut provided . 

Battery cables should not be drawn taut . 
Leave some slack for cable movement .

CauTIoN

The type of vehicle to which the winch and mounting 

channel will be applied, will dictate the type of 

mounting kit that should be used (Speed Mount™ 

Hitch Adapter, Standard Mounting Channel, or 

Specialty Mounting Kit) .

NoTe

If utilizing a mounting plate, ensure that the three 

major sections (motor, drum and gear housing) are 

properly aligned . Proper alignment of the winch will 

allow for even distribution of the full rated load .

CauTIoN

Related Manuals for Champion Power Equipment Model 10020

0.630526s