Chamberlain PILCEV & PILCEVC Owner's Manual

Chamberlain Garage Door Openers Owner's Manual - PILCEV & PILCEVC.
Download
Page  of 2
4.9, 1535 votes
background image

REMOTE LAMP CONTROL

MODELS PILCEV & PILCEVC

The Remote Lamp Control module offers a quick and convenient way 
to control the lights in your home. The module can be programmed 
to a remote control or a garage door opener. The module is 
compatible with up to 8 MyQ™ enabled remote controls OR a 
combination of up to 8 MyQ™ enabled garage door openers. This 
product is NOT to be used for appliances.

SPECIFICATIONS
Fluorescent .........................................................................600W / 5A
Tungsten .............................................................................600W  /  5A
LED .....................................................................................600W  /  5A
Electronic Ballast (Fluorescent) ...................................  599W / 4.99A

Re-lamp with listed SBCFL only, 599W total, maximum

MODES OF OPERATION

INSTALLATION & PROGRAMMING

To prevent possible SERIOUS INJURY or 
DEATH from electrocution or fi re, the light 
control is ONLY for indoor use.

NOTICE: To comply with FCC and/or Industry Canada (IC) 
rules. adjustment or modifications of this transceiver are 
prohibited. THERE ARE NO USER SERVICEABLE PARTS.

This device complies with Part 15 of the FCC rules and IC 
RSS-210. Operation is subject to the following two conditions: 
(1) this device may not cause harmful interference, and (2) 
this device must accept any interference received, including 
interference that may cause undesired operation.

REMOTE CONTROL OPERATION: 
Allows you to activate the 
module from a remote control.

OVERVIEW

1-800-528-9131

www.chamberlain.com

ONE YEAR LIMITED WARRANTY
The Chamberlain Group, Inc. warrants to the first retail purchaser of this 
product that is free from defect in materials and/or workmanship for a 
period of 1 year from the date of purchase.

TO ERASE ALL PROGRAMMING
Press and hold the Learn button on the module for 6 seconds. All 
programming is now erased.

The module can be programmed to a MyQ™ enabled remote control or a MyQ™ enabled garage door opener.

GARAGE DOOR OPENER OPERATION: 
Allows you to synchronize the module with your 
garage door opener light bulbs. Example: The garage 
door opener light bulbs are set to automatically turn 
off after 4 ½ minutes, the module will also turn off 
after 4 ½ minutes
.

Plug the lamp into the module and plug the 

module into an electrical outlet (the LED on 
the module will flash). NOTE: Make sure 
the lamp is switched ON.

2

If the lamp is not ON, press and release 
the Power button on the module to turn 
the lamp ON.

Press and release the Learn button on 

the module (the LED on the module 
will light).

4

The lamp’s light bulb will blink and the LED on the module will 
turn OFF when the device has been programmed.

Power Button

Lamp 
Outlet

LED

Learn 
Button

Press the button on 
the remote control.

Press the Learn button on 
the garage door opener.

OR

Related Manuals for Chamberlain PILCEV & PILCEVC

0.547808s