Chamberlain CWPIR Owner's Manual

Chamberlain Intercom Owner's Manual - CWPIR.
Download
Page  of 2
4.3, 2341 votes
background image

1

Carton Inventory

Assembly & Programming

Attach PIR Motion Sensor box 
to mounting plate with large 
silver screw. Tighten screw 
until PIR Motion Sensor stays 
in place when repositioned.

Passive Infra-Red (PIR)
Motion Sensor

Swivel Bushing

Mounting Plate

Sun/Rain Shield

1

Install 4 AA Alkaline 
batteries. (Lithium batteries 
recommended for colder 
environments.) 
LED light will fl ash.

2

Antenna

ON

OFF

1

2

SWITCH SETTINGS

Switch #1

Switch #2

Learn 
Button

OFF Low 

Sensitivity

ON 

 High Sensitivity (Default)

OFF 

15 Feet (4.5 m) Detection Range

ON 

 30 Feet (9.1 m) Detection Range 
(Default)

NOTE: To avoid unwanted detection of small animals move 
Switch #2 to OFF.

PIR Motion Sensor

SWITCH #1:

SWITCH #2:

A  Ensure Base Station and PIR 

Motion Sensor are in close 
proximity to each other. 
Press and release Learn 
Button on Base Station. 
Buzzer will sound.

B  Within 60 seconds, press the 

Learn Button on the inside of 
the PIR Motion Sensor. LED 
light will illuminate and Base 
Station will buzz.

3

Learn Button

Test PIR Motion Sensor by 
waving hand in front of sensor. 
LED light should fl ash and 
the Base Station will buzz X 
number of times indicating 
which sensor has been 
activated.

Insert battery pack facing away 
from circuit board and fasten 
cover with the smallest screws 
(provided).
NOTE: Ensure the batteries do 
not touch the circuit board and 
the antenna and battery wires 
are not pinched.

4

5

Overview

Learn Button

Models CWPIR and CWPIRC

WIRELESS MOTION ALERT SENSOR

® 

The Wireless Alert Sensor is a Passive Infra-Red (PIR) Motion Sensor that detects movement of people and vehicles, while allowing 
small animals to pass through undetected. Each sensor has its own unique ID, for a secure radio link. The base station (not provided) 
can learn the signals of up to 8 sensors. The base station gives a single beep for the fi rst sensor that is programmed, a double beep for 
the second, and so on. Additionally, multiple base stations can work with the same sensor to sound in different places.

Related Manuals for Chamberlain CWPIR

0.499827s