Casio G-SHOCK TOUGH SOLAR GW-1401-2 Operation Manual

Casio Other Operation Manual - G-SHOCK TOUGH SOLAR GW-1401-2.
Download
Page  of 4
4.7, 1034 votes
background image

Operation Guide 3357

1

To do this:

Change the city code

Toggle between Daylight Saving Time
(ON) and Standard Time (OFF)

Toggle between 12-hour (12H) and
24-hour (24H) timekeeping

Do this:

Press D (east).

Press D.

Press D.

MO0405-EA

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully and keep it on hand for later reference
when necessary.

Expose the watch to bright light to charge its battery before using it.
You can use this watch even as its battery is being charged by exposure to bright
light.

• Be sure to read “Power Supply” for important information you need to know

when exposing the watch to bright light.

If the digital display of the watch is blank...

If the Power Saving on indicator is flashing on the display,
it means that the Power Saving function has turned off the
display to conserve power. Power Saving automatically
turns off the display and enters a sleep state whenever
the watch is left for a certain period where it is dark.

• The initial factory default setting is Power Saving on.

• The watch will recover from the sleep state if you move it

to a well-lit area,* if you press any button, or if you angle

the watch towards your face for reading.
* It can take up to two seconds for the display to turn on.

• See “Power Saving” for more information.

Power saving on indicator

Digital display

About This Manual

• Button operations are indicated using the letters shown

in the illustration.

• Most of the display examples in this manual show only

the digital display, without the analog hands.

• Each section of this manual provides you with the

information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.

Digital display

Hour hand

Minute hand

General Guide
• Press C to change from mode to mode.

• In any mode, press B to illuminate the face of the watch.

• The Battery Level Screen shows the current battery level. See “Battery Power

Levels” for more information.

WED

NYC

STW

World Time  Mode

Alarm  Mode

Stopwatch Mode

Timekeeping Mode

Press C.

Battery Level Screen

Hand Setting Mode

Timekeeping

Use the Timekeeping Mode to set and view the current time and date.

• In the Timekeeping Mode, press A to cycle through the digital time screens as

shown below.

Time

Seconds

Date

Press A.

Month. Day

Hour : Minutes

PM indicator

Day of week

2 seconds

Setting the Digital Time and Date
This watch is preset with a number of city codes, each of which represents the time
zone where that city is located. When setting the digital time, it is important that you
select the correct city code for your Home City (the city where you normally use the
watch). If your location is not included in the preset city codes, select the preset city
code that is in the same time zone as your location.

• Note that all of the times for the World Time Mode city codes are displayed in

accordance with the digital time and date settings you configure in the Timekeeping
Mode.

To set the digital time and date

1. In the Timekeeping Mode, hold down A until the city

code starts to flash, which indicates the setting screen.

2. Press D to select the city code you want.

• Make sure you select your Home City code before

changing any other setting.

• See “City Code Table” for a complete list of available

city codes.

l l l l l

ll

ll

ll

ll

ll

l

3. Press C to move the flashing in the sequence shown below to select other settings.

    

Seconds

Hour

Minutes

12/24-Hour 
Format

Month

Year

DST

Day

Power 
Saving

City Code

4. When the setting you want to change is flashing, use D to change it as described

below.
 

• The following steps explain how to configure timekeeping settings only.

      Screen

Reset the seconds to 00

Change the hour or minutes

Change the year

Change the month or day

Press D.

Press D(to increase).

5. Press A to exit the setting screen.

• When you exit the setting screen, the analog hands are adjusted automatically to

match the digital time. See “Analog Timekeeping” for more information.

• See “Daylight Saving Time (DST)” for details about the DST setting.

• For information about specifying how long the face of the watch remains illuminated,

see “To specify the illumination duration”.

• For details about configuring settings for the Power Saving feature, see “Power

Saving”.

Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.

To toggle the Timekeeping Mode digital time between DST and Standard Time

1. In the Timekeeping Mode, hold down A until the city

code starts to flash, which indicates the setting screen.

2. Press C once and the DST setting screen appears.
3. Press D to toggle between Daylight Saving Time (ON

displayed) and Standard Time (OFF displayed).

4. Press A to exit the setting screen.

• The DST indicator appears on the display to indicate

that Daylight Saving Time is turned on.

l ll

lll

ll

ll

ll

ll

l

Analog Timekeeping
The analog time of this watch is synchronized with the digital time. The analog time
setting is adjusted automatically whenever you change the digital time.

Note

• The hands for the analog timepiece move to adjust to a new setting whenever any of

the following occurs.
When you change the digital time setting
When you change the Home City code and/or DST setting

• If the analog time does not match the digital time for some reason, use the

procedure below to adjust the analog time to the digital time.

• Whenever you need to adjust both the digital and the analog time settings manually,

make sure you adjust the digital setting first.

• Depending on how much the hands have to move in order to adjust to the digital

time, it may take some time before they stop moving.

To adjust the analog time

1. In the Timekeeping Mode, press C five times to enter

the Hand Setting Mode.

2. Hold down A until the current digital time starts to

flash, which indicates the analog time setting screen.

3. Press D to advance the analog time setting by 20

seconds.

• Holding down D advances the analog time setting at

high speed.

• If you need to advance the analog time setting a long way, hold down D until the

time starts advancing at high speed, and then press B. This locks the high-speed
hand movement, so you can release the two buttons. High-speed hand movement
continues until you press any button. It will also stop automatically after the time
advances 12 hours or if an alarm starts to sound.

4. Press A to exit the setting screen.

• The minute hand will be adjusted slightly to match the seconds when you exit the

setting screen.

• To return to the Timekeeping Mode, press C.

l l l l

ll

ll

ll

ll

ll

l l

l

 

0.557128s