Casio EFA119BK-1AV Operation Manual

Casio Watches Operation Manual - EFA119BK-1AV.
Download
Page  of 4
4.9, 1009 votes
background image

Operation Guide 4334

1

MO0607-EB

Warning!

• The measurement functions built into this watch are not intended for use in taking

measurements that require professional or industrial precision. Values produced
by this watch should be considered as reasonably accurate representations only.

• CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any

claims by third parties that may arise through the use of this watch.

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to read this manual carefully.

About This Manual

• Button operations are indicated using the letters shown

in the illustration.

• For the sake of simplicity, the sample displays in this

manual do not show the analog hands of the watch.

• Depending on the model of your watch, display text

appears either as dark figures on a light background, or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.

• Each section of this manual provides you with the

information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.

(Light)

General Guide
• Press C to change from mode to mode.

• In any mode, press L to illuminate the display.

Recall Mode

World Time Mode

Stopwatch Modes

Countdown Timer

Mode

Alarm Mode

Press C.

Hand Setting Mode

TimeKeeping Mode

This watch has two
stopwatch modes. See
“Stopwatches” for more
information.

Timekeeping

Use the Timekeeping Mode to set and view the current
time and date.
This watch features separate digital and analog
timekeeping. The procedures for setting the digital time
and analog time are different.

• See “Thermometer” for details about the thermometer.

Setting the Digital Time and Date
This watch is preset with UTC differential values that
represent each time zone around the globe. Before setting
the digital time, be sure to first set the UTC differential for
your Home Time, which is the location where you normally
will be using the watch.

• Note that World Time mode times are all displayed

based on the time and date settings you configure in the
Timekeeping Mode.

PM indicator

Hour : Minutes

Seconds

 Month – Day

Thermometer

Day of week

To set the digital time and date

1. In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting
screen.

• Be sure to configure the correct UTC differential for

your Home Time before configuring any other
Timekeeping Mode settings.

• See the “UTC Differential/City Code List” for

information about the UTC differential settings that are
supported.

2. Press C to move the flashing in the sequence shown

below to select other settings.

l l

ll

lll

lll

ll

l l l

l

Seconds

Hour

UTC 

Differential

Minutes

Year

DST

Day

Month

Seconds

Temperature 

Unit

12/24-Hour 

Format

Temperature Sensor 

Calibration 

Screen:

To do this:

Reset the seconds to 

00

Toggle between Daylight Saving
Time (ON) and Standard Time (OF)
Specify the UTC differential

Change the hour or minutes

Toggle between 12-hour (

12H) and

24-hour (

24H) timekeeping

Do this:

Press D.

Press D.

Use D (+) and B (–).

Use D (+) and B (–).

Press D.

Use D (+) and B (–).

Change the year

Change the month or day

3. When the setting you want to change is flashing, use D and B to change it as

described below.

• The UTC differential setting range is –12.0 to +14.0, in 0.5-hour units.

• For information about settings other than the time and date, see the following.

Temperature Sensor Calibration:  “Thermometer”
Temperature Unit: “Thermometer”

4. Press A to exit the setting screen.

• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is

applied in all modes.

• The day of the week is displayed automatically in accordance with the date (year,

month, and day) settings.

• When DST is turned on, the UTC differential setting range is –11.0 to +15.0, in 0.5-

hour units.

• Any time the seconds setting is changed, the analog hands are adjusted accordingly.

• See “Daylight Saving Time (DST) Setting” below for details about the DST setting.

Daylight Saving Time (DST) Setting
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.

To toggle the Timekeeping Mode digital time between DST and Standard Time

1.In the Timekeeping Mode, hold down A until the

seconds start to flash, which indicates the setting
screen.

2. Press C once and the DST setting screen appears.
3. Press D to toggle between Daylight Saving Time (ON

displayed) and Standard Time (OF displayed).

4. Press A to exit the setting screen.

• The DST indicator appears on the Timekeeping, Alarm,

and Hand Setting Mode screens to indicate that
Daylight Saving Time is turned on.

Setting the Analog Time
Perform the procedure below when the time indicated by the analog hands does not
match the time of the digital display.

l l

ll

lll

lll

ll

l

l l

l

ll

ll

ll

l

l

l l

l l

DST indicator

On/Off status

To adjust the analog time

1. In the Timekeeping Mode, press C six times to enter

the Hand Setting Mode.

2. Hold down A until the current digital time starts to

flash, which indicates the setting screen.

3. Use D to adjust the analog setting.

• Press D once to advance the hands 20 seconds.

• Hold down D to advance the hands at high speed.

• To lock high speed hands movement, hold down D to start it and then press B

to lock. The hands will continue to advance for one 12-hour cycle or until you
press any button to stop it.
High-speed hand movement also will stop automatically after the time advances
12 hours or if an alarm (daily alarm, Hourly Time Signal, or countdown beeper)
starts to sound.

4. Press A to exit the setting screen.

• The minute hand will be adjusted slightly to match the seconds when you exit the

setting screen.

• To return to the Timekeeping Mode, press C.

l l ll

lll

ll

ll

ll

l l

l l l

Stopwatches

Your watch has two stopwatch modes: a Single Stopwatch
Mode and a Dual Stopwatch Mode. Both stopwatch
modes measure times in 1/100-second units for the first
hour, and in 1-second units after that. In both stopwatch
modes, timing is possible up to 99 hours, 59 minutes,
59.99 seconds.
The Single Stopwatch Mode (ST1) displays the total
elapsed time and lap times for a single vehicle or runner.
The Dual Stopwatch Mode (ST2) can be used to measure
elapsed time for two vehicles or runners at the same time,
including separate lap times and the time differential
between vehicles or runners.
The data produced by either stopwatch mode is stored
automatically in watch memory, for later recall when you
need it.

• When the elapsed time being kept by either of the stopwatches exceeds 99 hours,

59 minutes, 59.99 seconds, the displayed time returns to all zeros and time
measurement continues from there. Elapsed time measurement continues until you
reset it to all zeros.

• All of the operations in this section are performed in the stopwatch modes, which

you enter by pressing C.

0.534619s